Domains

Domain API Command List

Our API is your advanced domain management and acquisition toolkit that's built for efficiency. With over 50 commands to setup, manage, register, and bid throughout the Dynadot platform, you'll have full control over your account and domain settings on any API software of your choice. Our domain API is available to all accounts, so get started today!

Getting Started With Our Advanced Domain API

Requests to our Advanced Domain API are sent to the following URL:

https://api.dynadot.com/api3.xml

Requests should be sent over https (secure socket) for security. The request should have the following two parameters, a 'Key' and a 'Command'. The commands can each be clicked to see the parameters associated with them.

You will receive different thread counts based on the price level of your account:

Price level	Account
Regular	1 thread
Bulk	5 threads
super bulk	25 threads
premium bulk	25 threads

Request ParameterExplanation

Request Parameter
Explanation

KeyYour key to access the API, available in your Dynadot account control panel under the 'Tools' -> 'API' sidebar menu.

Command

Domain:

, , , , , ,

, , , , , , , , , , , , , , , , , , ,

, , , ,

,

contact:

, , , , , ,

, ,

Nameserver:

, , , , , , ,

Account:

, , , , , , , , , , , ,

Folder:

, , , , , , , , , , , , , ,

Aftermarket:

, ,

, , , ,

, , , , , , , ,

Other:

, , , , , ,

XML format. The response you receive should contain 2 or 3 of the following fields:

Result XML tagExplanation

Result XML tag
Explanation

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Search Command

Support multi-thread

If calling the search command, the following parameters should be included:

Search Request ParameterExplanation

Search Request Parameter
Explanation

domain0 - domain99The domain name you are searching for, regular account can specify 1 domain per command, bulk and super bulk account can specify up to 100 domains

language0 - language99 (optional)The language tag for the respective domain, only use this for IDNs

show_price (optional)If you want to show the price in your account currency, set it equal to "1".

currency (optional)You can decide the currency type and this parameter supported are "USD","CNY", "GBP","EUR","INR","CAD" and so on.If you missed this parameter,we will use the account default currency

Result XML tagExplanation

Result XML tag
Explanation

<Results></Results>The root node of the XML response of search command

<SearchResponse></SearchResponse>Tag of search response

<SearchHeader></SearchHeader>Tag of search header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<DomainName></DomainName>The domain name you have just searched

<Available></Available>If the domain name is available

<Price></Price>If you set"show_price" equal to "1", this will tell you the price info if this domain is available.

<Language></Language>Language information about the domain name

Search Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=search&domain0=mydomain.com&domain1=mydomain.net&show_price=1&currency=USD

Response (XML format)

<Results>
  <SearchResponse>
    <SearchHeader>
      <SuccessCode>0</SuccessCode>
      <DomainName>mydomain.com</DomainName>
      <Available>yes</Available>
      <Price>77.00 in USD</Price>
    </SearchHeader>
  </SearchResponse>
  <SearchResponse>
    <SearchHeader>
      <SuccessCode>0</SuccessCode>
      <DomainName>mydomain.net</DomainName>
      <Available>yes</Available>
      <Price>44.00 in USD</Price>
    </SearchHeader>
  </SearchResponse>
</Results>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=search&domain0=mydomain.com&domain1=mydomain.net&show_price=1&currency=USD

Response (JSON format)

{
   "SearchResponse":{
      "ResponseCode":"0",
      "SearchResults":[
         {
            "DomainName":"mydomain.com",
            "Available":"yes",
            "Price":"77.00 in USD"
         },
         {
            "DomainName":"mydomain.net",
            "Available":"yes",
            "Price":"44.00 in USD"
         }
      ]
   }
}

Support multi-thread

Calling the register command will create and process a registration order. You must have enough account balance to pay for the order. If calling the register command, the following parameters should be included:

domainThe domain name you want to register, only 1 domain can be registered per request

language (optional)The language tag for the requested domain, only needed if the domain is an IDN

durationHow long to register the domain for

registrant_contact (optional)The registrant contact you want to use on the domain

admin_contact (optional)The admin contact you want to use on the domain

technical_contact (optional)The technical contact you want to use on the domain

billing_contact (optional)The billing contact you want to use on the domain

option0 (if necessary)
The .AT, .BE, registrant name

option1 (if necessary)The .AT, .BE, registrant organization (optional)
For .AT, you can specify either option0, option1, or both

premium (optional)If you want to register a premium domain, set it equal to "1" (optional)

coupon (optional)The coupon code you want to apply to this command

Result XML tagExplanation

Result XML tag
Explanation

<RegisterResponse></RegisterResponse>Tag of register response

<RegisterHeader></RegisterHeader>Tag of register header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<RegisterContent></RegisterContent>The tag of register content

<Expiration></Expiration>Expiration date in Unix time (milliseconds since midnight UTC of January 1, 1970), only used when result is "success"

<Registration></Registration>Registration date in Unix time (milliseconds since midnight UTC of January 1, 1970), only used when result is "success"

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=register&domain=domain1.net&duration=3&currency=USD

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<RegisterResponse>
  <RegisterHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </RegisterHeader>
  <RegisterContent>
    <Expiration>1458379145266</Expiration>
  </RegisterContent>
</RegisterResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=register&domain=domain1.net&duration=3&currency=USD

Response (JSON format)

{
  "RegisterResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "DomainName": "domain1.net",
    "Expiration": 1458379145266
  }
}

Delete Command

Support multi-thread

Calling the delete command will delete a domain that is still in the grace period. Your account balance will be credited back the registration fee. Domains that have been renewed, or that have been moved to a new account cannot be deleted through the API. If calling the delete command, the following parameters should be included:

Delete Request ParameterExplanation

Delete Request Parameter
Explanation

domainThe domain name you want to delete, only 1 domain can be deleted per request

Result XML tagExplanation

Result XML tag
Explanation

<DeleteResponse></DeleteResponse>Tag of delete response

<DeleteHeader></DeleteHeader>Tag of delete header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Delete Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=delete&domain=domain1.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<DeleteResponse>
  <DeleteHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </DeleteHeader>
</DeleteResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=delete&domain=domain1.com

Response (JSON format)

{
  "DeleteResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "DomainName": "domain1.com"
  }
}

Renew Command

Support multi-thread

Calling the renew command will create and process a renewal order. You must have enough account balance to pay for the order. If calling the renew command, the following parameters should be included:

Renew Request ParameterExplanation

Renew Request Parameter
Explanation

domainThe domain name you want to renew, only 1 domain can be renewed per request

durationHow many years to renew the domain for

year (optional)The current year the domain expires

price_check (optional)You can add this parameter to the command to check the price detail for renewing this domain. NOTE: Adding this parameter to command, our api will not renew the domain, but only display the price info.

coupon (optional)The coupon code you want to apply to this command

no_renew_if_late_renew_fee_needed (optional)You can add this parameter to the command to avoid the renewal if the domain requires late renewal fee. If domain does requires late renew fee to renew, and "no_renew_if_late_renew_fee_needed = 1" was passed in command, domain will not be renewed.

Result XML tagExplanation

Result XML tag
Explanation

<RenewResponse></RenewResponse>Tag of renew response, it's the root node of the response XML document

<RenewHeader></RenewHeader>Renew header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<PriceInfo></PriceInfo>Tag of price info, it's only used when status is "price_check_success"

<RenewContent></RenewContent>Tag of renew content, it's only used when status is "success"

<Expiration></Expiration>Expiration date in Unix time (milliseconds since midnight UTC of January 1, 1970), only used when result is "success"

Renew Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&domain=domian1.com&command=renew&duration=1&currency=USD&coupon=testcoupon

Response (XML format)

<RenewResponse>
  <RenewHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </RenewHeader>
  <RenewContent>
    <Expiration>73984579834</Expiration>
  </RenewContent>
</RenewResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&domain=domian1.com&command=renew&duration=1&currency=USD&coupon=testcoupon

Response (JSON format)

{
   "RenewResponse":{
      "ResponseCode":"0",
      "Status":"success",
      "DomainName":"domain1.com",
      "Expiration":"73984579834"
   }
}

Push Command

Support multi-thread

Calling the push command will create and process a push order. You must unlock your domain and account for the order. Receiver account need to reject/accept the domain to complete the order. If calling the push command, the following parameters should be included:

Push Request ParameterExplanation

Push Request Parameter
Explanation

domainThe domain name you want to push. We also support bulk push, you can use ";" to split domains. Example: domain1.com;domain2.com

receiver_push_usernamePush Username of receiver account

unlock_domain_for_push(optional)Set this parameter equal to "1". If the domain is locked, we will automatically unlock it, so you don't have to manually unlock the domain

receiver_email(optional)Push email of receiver account

Result XML tagExplanation

Result XML tag
Explanation

<PushResponse></PushResponse>Tag of push response, it's the root node of the response XML document

<PushHeader></PushHeader>Push header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Push Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=push&domain=domian1.com&receiver_push_username=username&currency=USD

Response (XML format)

<PushResponse>
  <PushHeader>
    <SuccessCode>0</SuccessCode>
    <Status>order created</Status>
  </PushHeader>
</PushResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=push&domain=domian1.com&receiver_push_username=username&currency=USD

Response (JSON format)

{
   "PushResponse":{
      "ResponseCode":"0",
      "Status":"order created"
   }
}

Transfer Command

Support multi-thread

Calling the transfer command will create and process a transfer order. Some tlds may require losing registrar to confirm to complete the order. If calling the transfer command, the following parameters should be included:

Transfer Request ParameterExplanation

Transfer Request Parameter
Explanation

domainThe domain name you want to transfer in to Dynadot, only 1 domain can be transferred per request

authThe authorization code for the transfer request.

registrant_contact (optional)The registrant contact that you want to use when transfer completed. (Not all tld supports this feature)

admin_contact (optional)The admin contact that you want to use when transfer completed. (Not all tld supports this feature)

technical_contact (optional)The technical contact that you want to use when transfer completed. (Not all tld supports this feature)

billing_contact (optional)The billing contact that you want to use when transfer completed. (Not all tld supports this feature)

premium (optional)If you want to transfer a premium domain, set it equal to "1" (optional)

privacy (optional)The privacy status of the domain you want to set, it can be "on" or "off". The account default privacy level will be applied if incorrect or no input given

name_servers (optional)The list of name servers to apply to the domain once the transfer is complete. You can use "," to split name servers. Example: ns1.domain1.com,ns2.domain2.com

coupon (optional)The coupon code you want to apply to this command

Result XML tagExplanation

Result XML tag
Explanation

<TransferResponse></TransferResponse>Tag of transfer response, it's the root node of the response XML document

<TransferHeader></TransferHeader>Transfer header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Transfer Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=transfer&domain=domian1.com&auth=testauth&currency=USD&coupon=testcoupon

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<TransferResponse>
  <TransferHeader>
    <SuccessCode>0</SuccessCode>
    <Status>order created</Status>
    <DomainName>domain1.com</DomainName>
    <OrderId>1234567</OrderId>
  </TransferHeader>
</TransferResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=transfer&domain=domian1.com&auth=testauth&currency=USD&coupon=testcoupon

Response (JSON format)

{
  "TransferResponse": {
    "ResponseCode": 0,
    "Status": "order created",
    "DomainName": "domain1.com",
    "OrderId": "1234567"
  }
}

Bulk Register Command

Support multi-thread

Calling the bulk register command will create and process registration orders. You must have enough account balance to pay for the orders. If calling the bulk register command, the following parameters should be included:

Bulk Register Request ParameterExplanation

Bulk Register Request Parameter
Explanation

domain0-domain99The domain name(s) you want to register, maximum 100 domains can be registered per request

premium (optional)If you want to register a premium domain, set it equal to "1" (optional)

currency (optional)You can decide the currency type and this parameter supported are "USD","CNY", "GBP","EUR","INR","CAD" and so on. If you missed this parameter,we will use the account default currency

coupon (optional)The coupon code you want to apply to this command

Result XML tagExplanation

Result XML tag
Explanation

<BulkRegisterResponse></BulkRegisterResponse>Tag of bulk register response

<BulkRegisterHeader></BulkRegisterHeader>Tag of bulk register header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<BulkRegisterContent></BulkRegisterContent>The tag of bulk register content

<Expiration></Expiration>Expiration date in Unix time (milliseconds since midnight UTC of January 1, 1970), only used when result is "success"

<Result></Result>The result of the register action

<Message></Message>Error message of register action, only used when result is "error"

Bulk Register Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=bulk_register&domain0=domain0.com&domain1=domain1.com&currency=USD

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<BulkRegisterResponse>
  <BulkRegisterHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </BulkRegisterHeader>
  <BulkRegisterContent>
    <BulkRegister>
      <RegisterResult>
        <DomainName>domain0.com</DomainName>
        <Expiration>1234567890</Expiration>
        <Result>success</Result>
        <Message>-</Message>
      </RegisterResult>
      <RegisterResult>
        <DomainName>domain1.com</DomainName>
        <Expiration>-</Expiration>
        <Result>error</Result>
        <Message>not_available</Message>
      </RegisterResult>
    </BulkRegister>
  </BulkRegisterContent>
</BulkRegisterResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=bulk_register&domain0=domain0.com&domain1=domain1.com&currency=USD

Response (JSON format)

{
  "BulkRegisterResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "BulkRegister": [
      {
        "DomainName": "domain0.com",
        "Expiration": "1234567890",
        "Result": "success",
        "Message": "-"
      },
      {
        "DomainName": "domain1.com",
        "Expiration": "-",
        "Result": "error",
        "Message": "not_available"
      }
    ]
  }
}

Domain Info Command

Support multi-thread

This command is only available in XML and JSON format:

Domain Info Request ParameterExplanation

Domain Info Request Parameter
Explanation

domainOnly 1 domain permitted per request

Result XML tagExplanation

Result XML tag
Explanation

<DomainInfoResponse></DomainInfoResponse>Root node of the response XML document

<DomainInfoResponseHeader></DomainInfoResponseHeader>Response header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<DomainInfoContent></DomainInfoContent>Response content

<Domain></Domain>Domain

<Name></Name>Domain's name

<Expiration></Expiration>Domain expiration date in Unix time (milliseconds since midnight UTC of January 1, 1970)

<Registration></Registration>Domain registration date in Unix time (milliseconds since midnight UTC of January 1, 1970)

<NameServerSettings></NameServerSettings>Domain's name server settings

<Type></Type>Domain's name server type

<WithAds></WithAds>If you want a parking page for your domain

<Whois></Whois>Whois information

<Registrant></Registrant>Registrant information

<ContactId></ContactId>Contact Id

<Admin></Admin>Admin information

<Technical></Technical>Technical information

<Billing></Billing>Billing information

<Locked></Locked>Locked or not

<Disabled></Disabled>Enable status

<UdrpLocked></UdrpLocked>Udrp locked or not

<RegistrantUnverified></RegistrantUnverified>Registrant unverified

<Hold></Hold>Hold

<Privacy></Privacy>Privacy status

<isForSale></isForSale>Sale status

<RenewOption></RenewOption>Renew option

<Note></Note>Note

<Folder></Folder>Folder information

<FolderId></FolderId>Folder ID

<FolderName></FolderName>Folder name

Domain Information Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=domain_info&domain=domain1.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<DomainInfoResponse>
  <DomainInfoHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </DomainInfoHeader>
  <DomainInfoContent>
    <Domain>
      <Name>domain1.com</Name>
      <Expiration>1361430589062</Expiration>
      <Registration>1234567890123</Registration>
      <NameServerSettings>
        <Type>Dynadot Parking</Type>
        <WithAds>Yes</WithAds>
      </NameServerSettings>
      <Whois>
        <Registrant>
          <ContactId>0</ContactId>
        </Registrant>
        <Admin>
          <ContactId>0</ContactId>
        </Admin>
        <Technical>
          <ContactId>0</ContactId>
        </Technical>
        <Billing>
          <ContactId>0</ContactId>
        </Billing>
      </Whois>
      <Locked>yes</Locked>
      <Disabled>no</Disabled>
      <UdrpLocked>no</UdrpLocked>
      <RegistrantUnverified>no</RegistrantUnverified>
      <Hold>no</Hold>
      <Privacy>none</Privacy>
      <isForSale>yes</isForSale>
      <RenewOption>no renew option</RenewOption>
      <Note/>
      <Folder>
        <FolderId>-1</FolderId>
        <FolderName>(no folder)</FolderName>
      </Folder>
    </Domain>
  </DomainInfoContent>
</DomainInfoResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=domain_info&domain=domain1.com

Response (JSON format)

{
  "DomainInfoResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "DomainInfo": {
      "Name": "domain1.com",
      "Expiration": "1361430589062",
      "Registration": "1234567890123",
      "NameServerSettings": {
        "Type": "Dynadot Parking",
        "WithAds": "Yes"
      },
      "Whois": {
        "Registrant": {
          "ContactId": "0"
        },
        "Admin": {
          "ContactId": "0"
        },
        "Technical": {
          "ContactId": "0"
        },
        "Billing": {
          "ContactId": "0"
        }
      },
      "Locked": "yes",
      "Disabled": "no",
      "UdrpLocked": "no",
      "RegistrantUnverified": "no",
      "Hold": "no",
      "Privacy": "none",
      "isForSale": "yes",
      "RenewOption": "no renew option",
      "Note": "",
      "Folder": {
        "FolderId": "-1",
        "FolderName": "(no folder)"
      }
    }
  }
}

Set Whois Command

Support multi-thread

If calling set Whois command, the following parameters should be included:

Set Whois Request ParameterExplanation

Set Whois Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

registrant_contactThe registrant's information of the domain

admin_contactThe administrator's information of the domain

technical_contactThe technical information of the domain

billing_contactThe billing information of the domain

Result XML tagExplanation

Result XML tag
Explanation

<SetWhoisResponse></SetWhoisResponse>Root node of the response XML document

<SetWhoisHeader></SetWhoisHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Whois Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_whois&domain=domain4.com&registrant_contact=0&admin_contact=0&technical_contact=0&billing_contact=0

Response (XML format)

<SetWhoisResponse>
  <SetWhoisHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetWhoisHeader>
</SetWhoisResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_whois&domain=domain4.com&registrant_contact=0&admin_contact=0&technical_contact=0&billing_contact=0

Response (JSON format)

{
   "SetWhoisResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Name Servers Command

Support multi-thread

If calling the set name servers command, the following parameters should be included:

Set Name Servers Request ParameterExplanation

Set Name Servers Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

ns0 - ns12The name servers to set your domain to use, you can specify up to 13 name servers, but they must already be in your account

Result XML tagExplanation

Result XML tag
Explanation

<SetNsResponse></SetNsResponse>Tag of set name server response, it's the root node of the response XML document

<SetNsHeader></SetNsHeader>Tag of set name server response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Ns Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_ns&domain=domain1.com,domain2.com&ns0=ns1.hostns.com&ns1=ns2.hostns.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetNsResponse>
  <SetNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetNsHeader>
</SetNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_ns&domain=domain1.com,domain2.com&ns0=ns1.hostns.com&ns1=ns2.hostns.com

Response (JSON format)

{
  "SetNsResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Set Parking Command

Support multi-thread

If calling the set parking command, the following parameters should be included:

Set Parking Request ParameterExplanation

Set Parking Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

with_ads (optional)If you do not want a 3rd-party ads, you can use this parameter with "no"

Result XML tagExplanation

Result XML tag
Explanation

<SetParkingResponse></SetParkingResponse>Tag of set parking response, it's the root node of the response XML document

<SetParkingHeader></SetParkingHeader>Set parking folder header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Parking Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_parking&domain=domain1.com&with_ads=no

Response (XML format)

<SetParkingResponse>
  <SetParkingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetParkingHeader>
</SetParkingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_parking&domain=domain1.com&with_ads=no

Response (JSON format)

{
   "SetParkingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Forwarding Command

Support multi-thread

If calling the set forwarding command, the following parameters should be included:

Set Forwarding Request ParameterExplanation

Set Forwarding Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

forward_urlThe URL you want your domain to forward to. Please note that the parameter must be encoded so that the API call is interpreted properly.

is_temp (optional)Forward status of your domain you want, default value is "temporary", if you want to forward permanently, use this parameter with "no"

Result XML tagExplanation

Result XML tag
Explanation

<SetForwardingResponse></SetForwardingResponse>Root node of the response XML document

<SetForwardingHeader></SetForwardingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Forwarding Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_forwarding&forward_url=http://www.mydomain.com&domain=domain1.com,domain2.com

Response (XML format)

<SetForwardingResponse>
  <SetForwardingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetForwardingHeader>
</SetForwardingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_forwarding&forward_url=http://www.mydomain.com&domain=domain1.com,domain2.com

Response (JSON format)

{
   "SetForwardingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Stealth Command

Support multi-thread

If calling set stealth command, the following parameters should be included:

Set Stealth Request ParameterExplanation

Set Stealth Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

stealth_urlThe URL you want your domain to forward to. Please note that the parameter must be encoded so that the API call is interpreted properly.

stealth_title (optional)The title of the page

Result XML tagExplanation

Result XML tag
Explanation

<SetStealthResponse></SetStealthResponse>Root node of the response XML document

<SetStealthHeader></SetStealthHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Stealth Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_stealth&domain=domain1.com&stealth_title=obama's shop&stealth_url=http://www.obamashop.com

Response (XML format)

<SetStealthResponse>
  <SetStealthHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetStealthHeader>
</SetStealthResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_stealth&domain=domain1.com&stealth_title=obama's shop&stealth_url=http://www.obamashop.com

Response (JSON format)

{
   "SetStealthResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Hosting Command

Support multi-thread

If calling the set hosting command, the following parameters should be included:

Set Hosting Request ParameterExplanation

Set Hosting Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

hosting_typeType of the hosting you want, you can select in "advanced" and "basic"

mobile_view_onOnly when hosting_type is "advanced", can you use this parameter as "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetHostingResponse></SetHostingResponse>Root node of the response XML document

<SetHostingHeader></SetHostingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Hosting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_hosting&domain=domain8.com&hosting_type=advanced&mobile_view_on=yes

Response (XML format)

<SetHostingResponse>
  <SetHostingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetHostingHeader>
</SetHostingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_hosting&domain=domain8.com&hosting_type=advanced&mobile_view_on=yes

Response (JSON format)

{
   "SetHostingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set DNS2 Command

Support multi-thread

If calling set DNS2 command, the following parameters should be included:

Please note that executing the SET_DNS2 command will, by default, overwrite the current DNS settings. To change this behavior and append the new DNS settings instead, you can use the optional parameter add_dns_to_current_setting.

Set DNS2 Request ParameterExplanation

Set DNS2 Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

main_record_type0 - main_record_type19 (optional)Main record type, should be "a", "aaaa", "cname", "forward", "txt", "mx", "stealth", "email"

main_record0 - main_record19Specify the DNS record for your domain

main_recordx0 - main_recordx19Mx distance, forward type(301 as "1", 302 as "2"), stealth forward title or email alias, necessary when main_record_type is "forward","mx","stealth","email".

subdomain0 - subdomain99 (optional)Subdomain records (optional)

sub_record_type0 - sub_record_type99Subdomain record type, should be "a", "aaaa", "cname", "forward", "txt", "srv", "mx", "stealth", "email"

sub_record0 - sub_record99Subdomain IP address or target host

sub_recordx0 - sub_recordx99Mx distance, forward type, stealth forward title or email alias, necessary when main_record_type is "forward","mx","stealth","email"

ttl (optional)Time to live

add_dns_to_current_setting (optional)if you want to append the new DNS settings to existing Dns settings. Set it equal to "1" (optional)

Result XML tagExplanation

Result XML tag
Explanation

<SetDnsResponse></SetDnsResponse>Root node of the response XML document

<SetDnsHeader></SetDnsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set DNS2 Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_dns2&domain=domain1.com&main_record_type0=aaaa&main_record0=0:0:0:0:0:0:0:1&main_record_type1=mx&main_record1=mail1.myisp.com&main_recordx1=0&subdomain0=www&sub_record_type0=a&sub_record0=192.168.1.1

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetDnsResponse>
  <SetDnsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDnsHeader>
</SetDnsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_dns2&domain=domain1.com&main_record_type0=aaaa&main_record0=0:0:0:0:0:0:0:1&main_record_type1=mx&main_record1=mail1.myisp.com&main_recordx1=0&subdomain0=www&sub_record_type0=a&sub_record0=192.168.1.1

Response (JSON format)

{
  "SetDnsResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Set Dnssec Command

Support multi-thread

Calling the Set Dnssec Command will set domain dnssec. This command is only available in XML and JSON format.If calling this command, the following parameters should be included:

You can choose to fill in the corresponding parameter values in the Option based on your domain name.

Option 1 : domain_name , key_tag , digest_type , digest , algorithm

Option 2 : domain_name , flags , public_key , algorithm

Notes: Please select the number of the corresponding label as the value of your parameterIf any.

Set Dnssec Request ParameterExplanation

Set Dnssec Request Parameter
Explanation

domain_nameThe domain name for which you need to set up dnssec

key_tagKey tag

digest_typeYou can choose a number from the following list to represent your digital signature type: SHA-1(1) SHA-256(2) GOSTR 34.11-94 (3) SHA-384(4)

digestPlease enter the value corresponding to the digest type you have selected

algorithmYou can choose a number from the following list to represent your digital signature algorithm: RSA/MD5(1) Diffie-Hellman (2) DSA/SHA-1(3) Elliptic Curve (4) RSA/SHA-1(5) DSA-NSEC3-SHA1(6) RSASHA1-NSEC3-SHA1(7) RSA/SHA-256(8) RSA/SHA-512(10) GOSTR 34.10-2001(12) ECDSA Curve P-256 with SHA-256(13 ECDSA Curve P-384 with SHA-384(14) ED25519(15 ED448(16) Indirect (252) Private DNS (253 Private OID (254)

flagsYou can choose a number from the following list to represent your digital signature symbol: ZSK(256) KSK(257)

public_keyThe Public Key must be in base64 encoding.

Result XML tagExplanation

Result XML tag
Explanation

<SetDnssecResponse></SetDnssecResponse>the root node of the response

<SetDnssecHeader></SetDnssecHeader>Set Dnssec header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Dnssec Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_dnssec&domain_name=domain-haha1.com&flags=257&public_key=123&algorithm=1

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetDnssecResponse>
  <SetDnssecHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDnssecHeader>
  <SetDnssecContent/>
</SetDnssecResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_dnssec&domain_name=domain-haha1.com&flags=257&public_key=123&algorithm=1

Response (JSON format)

{
  "SetDnssecResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Set Email Forward Command

Support multi-thread

If calling set email forward command, the following parameters should be included:

Set Email Forward Request ParameterExplanation

Set Email Forward Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

forward_typeForward type, it can be "donot": Do not forward email, "mx": Deliver email to another mail host (MX record), "forward": Deliver email to another mail host

username0 - username9Username, only used when "forward_type" is "forward"

exist_email0 - exist_email9Existing email address, only used when "forward_type" is "forward"

mx_host0 - mx_host2Mail host, only used when "forward_type" is "mx"

mx_distance0 - mx_distance2Distance0 is the highest priority, only used when "forward_type" is "mx"

Result XML tagExplanation

Result XML tag
Explanation

<SetEmailForwardingResponse></SetEmailForwardingResponse>Root node of the response XML document

<SetEmailForwardingHeader></SetEmailForwardingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Email Forward Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_email_forward&domain=testdomain.com&forward_type=forward&username0=testusername&[email protected]

Response (XML format)

<SetEmailForwardingResponse>
  <SetEmailForwardingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetEmailForwardingHeader>
</SetEmailForwardingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_email_forward&domain=testdomain.com&forward_type=forward&username0=testusername&[email protected]

Response (JSON format)

{
   "SetEmailForwardingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Clear Domain Setting Command

Support multi-thread

If calling the set clear domain setting command, the following parameters should be included:

Set Clear Domain Setting Request ParameterExplanation

Set Clear Domain Setting Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

serviceThe service you want to clear, it can be "forward", "stealth", "email_forwarding", "dns", "dnssec", and "nameservers"

Result XML tagExplanation

Result XML tag
Explanation

<SetClearDomainSettingResponse></SetClearDomainSettingResponse>Root node of the response XML document

<SetClearDomainSettingHeader></SetClearDomainSettingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Clear Domain Setting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_clear_domain_setting&domain=domain1.com&service=nameservers

Response (XML format)

<SetClearDomainSettingResponse>
  <SetClearDomainSettingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetClearDomainSettingHeader>
</SetClearDomainSettingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_clear_domain_setting&domain=domain1.com&service=nameservers

Response (JSON format)

{
   "SetClearDomainSettingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Command

Support multi-thread

If calling the set folder command, the following parameters should be included:

Set Folder Request ParameterExplanation

Set Folder Request Parameter
Explanation

domainThe domain name to update, only 1 domain can be set per request

folderThe folder name that you want to move your domain in. Use "Default" as the folder name if you want to move the domain to the default folder. Folder name is case sensitive. For example, "Folder1" and "folder1" are two different folder names.

folder_id (optional)The folder ID that you want to move your domain to

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderResponse></SetFolderResponse>Tag of set folder response, it's the root node of the response XML document

<SetFolderHeader></SetFolderHeader>Set folder header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder&domain=domian1.com&folder=folder1

Response (XML format)

<SetFolderResponse>
  <SetFolderHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderHeader>
</SetFolderResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder&domain=domian1.com&folder=folder1

Response (JSON format)

{
   "SetFolderResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Note Command

Support multi-thread

If calling set note command, the following parameters should be included:

Set Note Request ParameterExplanation

Set Note Request Parameter
Explanation

domainThe domain you want to set, only 1 domain can be set per request

noteNote you want to set to the domain, can be null

Result XML tagExplanation

Result XML tag
Explanation

<SetNoteResponse></SetNoteResponse>Root node of the response XML document

<SetNoteHeader></SetNoteHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Note Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_note&domain=domain1.com&note=Do not modify any information

Response (XML format)

<SetNoteResponse>
  <SetNoteHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetNoteHeader>
</SetNoteResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_note&domain=domain1.com&note=Do not modify any information

Response (JSON format)

{
   "SetNoteResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Customer Id Command (RESELLER ONLY)

Support multi-thread

If calling set customer id command, the following parameters should be included:

Set Customer Id Request ParameterExplanation

Set Customer Id Request Parameter
Explanation

domainThe domain you want to set, multiple domains are separated by commas (Max:100)

customer_idCustomer id you want to set to the domain, can't be null

Result XML tagExplanation

Result XML tag
Explanation

<SetCustomerIdResponse></SetCustomerIdResponse>Root node of the response XML document

<SetCustomerIdHeader></SetCustomerIdHeader>Response header

<SetCustomerIdContent></SetCustomerIdContent>Response content

<SetCustomerIdSuccess></SetCustomerIdSuccess>Set customer id success response content

<SetCustomerIdFailed></SetCustomerIdFailed>Set customer id failed response content

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure, "1" for problem

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Customer Id Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_customer_id&domain=domain1.com,domain2.com&customer_id=123456

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetCustomerIdResponse>
  <SetCustomerIdHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </SetCustomerIdHeader>
  <SetCustomerIdContent>
    <SetCustomerIdSuccess>
      <content>
        <Domain>domain1.com</Domain>
        <CustomerId>123456</CustomerId>
      </content>
      <content>
        <Domain>domain2.com</Domain>
        <CustomerId>123456</CustomerId>
      </content>
    </SetCustomerIdSuccess>
  </SetCustomerIdContent>
</SetCustomerIdResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_customer_id&domain=domain1.com,domain2.com&customer_id=123456

Response (JSON format)

{
  "SetCustomerIdResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "SetCustomerIdSuccess": [
      {
        "Domain": "domain1.com",
        "CustomerId": 123456
      },
      {
        "Domain": "domain2.com",
        "CustomerId": 123456
      }
    ]
  }
}

Set Renew Option

Support multi-thread

If calling set renew option command, the following parameters should be included:

Set Renew Option Request ParameterExplanation

Set Renew Option Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

renew_optionIt can be "donot", "auto", "reset"

Result XML tagExplanation

Result XML tag
Explanation

<SetRenewOptionResponse></SetRenewOptionResponse>Root node of the response XML document

<SetRenewOptionHeader></SetRenewOptionHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Renew Option Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_renew_option&domain=domain1.com&renew_option=auto

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetRenewOptionResponse>
  <SetRenewOptionHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetRenewOptionHeader>
</SetRenewOptionResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_renew_option&domain=domain1.com&renew_option=auto

Response (JSON format)

{
  "SetRenewOptionResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Set Privacy Command

Support multi-thread

If calling set privacy command, the following parameters should be included:

Set Privacy Request ParameterExplanation

Set Privacy Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

optionThe privacy status of the domain you want to set, it can be "full", "partial", or "off"

whois_privacy_optionThe whois privacy status of the domain you want to set, it can be "yes" or "no"

Result XML tagExplanation

Result XML tag
Explanation

<SetPrivacyResponse></SetPrivacyResponse>Root node of the response XML document

<SetPrivacyHeader></SetPrivacyHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Privacy Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_privacy&domain=domain1.com&whois_privacy_option=yes&option=off

Response (XML format)

<SetPrivacyResponse>
  <SetPrivacyHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetPrivacyHeader>
</SetPrivacyResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_privacy&domain=domain1.com&whois_privacy_option=yes&option=off

Response (JSON format)

{
   "SetPrivacyResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

TLD Prices

Support multi-thread

This feature is only available in XML and JSON format:

Tld Prices Request ParameterExplanation

Tld Prices Request Parameter
Explanation

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is Api Default Currency of account setting

count_per_page (optional)How many entities are displayed per page

page_index (optional)Which page's entities do you want to view

sort (optional)Please select one of the following options as the value for the sorting parameter:
* If you have not selected it, we will use the default sorting.
1) RankAsc (Default)
2) RankDesc
3) NameAsc
4) NameDesc
5) SalesAsc
6) SalesDesc
7) LaunchDateAsc
8) LaunchDateDesc
9) CountAsc
10) CountDesc
11) RegistryAsc
12) RegistryDesc

Result XML tagExplanation

Result XML tag
Explanation

<TldPriceResponse></TldPriceResponse>Root node of the response XML document

<TldPriceResponseHeader></TldPriceResponseHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<TldPriceContent></TldPriceContent>Response content

<TldContent></TldContent>Tld info

<Tld></Tld>Top-Level Domains

<Usage></Usage>Usage of tld

<Price></Price>Price info of this tld. Contain sub-tags: : Unit of price : Price of Registration : Price of Renew : Price of Transfer

<Privacy></Privacy>If this tld supports whois privacy

<GracePeriod></GracePeriod>Grace period info of this tld. Contain sub-tags: : Unit of grace period info : Renew grace period : Delete grace period

<IDN></IDN>If this tld supports Internationalized Domain Names

<Restrictions></Restrictions>Domain name

TLD Prices Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=tld_price&currency=USD

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<TldPriceResponse>
  <TldPriceResponseHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
    <PriceLevel>Regular Pricing</PriceLevel>
    <Currency>USD</Currency>
  </TldPriceResponseHeader>
  <TldPriceContent>
    <TldContent>
      <Tld>com</Tld>
      <Usage>General</Usage>
      <Price>
        <Unit>(Price/1 year)</Unit>
        <Register>15.00</Register>
        <Renew>15.00</Renew>
        <Transfer>15.00</Transfer>
        <Restore>10.00</Restore>
      </Price>
      <Privacy>10.00</Privacy>
      <GracePeriod>
        <Unit>10.00</Unit>
        <Renew>10.00</Renew>
        <Delete>30</Delete>
        <Restore>YES</Restore>
      </GracePeriod>
      <IDN>YES</IDN>
      <Restrictions>--</Restrictions>
    </TldContent>
  </TldPriceContent>
</TldPriceResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=tld_price&currency=USD

Response (JSON format)

{
  "TldPriceResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "PriceLevel": "Regular Pricing",
    "Currency": "USD",
    "TldPrice": [
      {
        "Tld": "com",
        "Usage": "General",
        "IDN": "YES",
        "Restrictions": "--",
        "Privacy": "10.00",
        "Price": {
          "Unit": "(Price/1 year)",
          "Register": "15.00",
          "Renew": "15.00",
          "Transfer": "15.00",
          "Restore": "10.00"
        },
        "GracePeriod": {
          "Unit": "10.00",
          "Renew": "10.00",
          "Delete": "30",
          "Restore": "YES"
        }
      }
    ]
  }
}

List Domain Command

Support multi-thread

This feature is only available in XML and JSON format:

List Domain Request ParameterExplanation

List Domain Request Parameter
Explanation

customer_id (optional)Filter data by customer id (only resellers can use this parameter)

count_per_page (optional)How many entities are displayed per page

page_index (optional)Which page's entities do you want to view

sort (optional)Please select one of the following options as the value for the sorting parameter:
* If you have not selected it, we will use the default sorting.
1) CountAsc (Default)
2) CountDesc
3) NameAsc
4) NameDesc

Result XML tagExplanation

Result XML tag
Explanation

<ListDomainInfoResponse></ListDomainInfoResponse>Root node of the response XML document

<ListDomainInfoHeader></ListDomainInfoHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<ListDomainInfoContent></ListDomainInfoContent>Response content

<DomainInfoList></DomainInfoList>Domain information list

<DomainInfo></DomainInfo>Domain information

<Domain></Domain>Domain

<Name></Name>Domain name

<Expiration></Expiration>Domain expiration date in Unix time (milliseconds since midnight UTC of January 1, 1970)

<Registration></Registration>Domain registration date in Unix time (milliseconds since midnight UTC of January 1, 1970)

<NameServerSettings></NameServerSettings>Name server settings

<Type></Type>Name server setting type

<WithAds></WithAds>With ads or not

<Whois></Whois>Whois information

<Registrant></Registrant>Registrant information

<ContactId></ContactId>Contact Id

<Admin></Admin>Admin information

<Technical></Technical>Technical information

<Billing></Billing>Billing information

<Locked></Locked>Locked or not

<Disabled></Disabled>Enable status

<Hold></Hold>Hold

<Privacy></Privacy>Privacy status

<isForSale></isForSale>Sale status

<RenewOption></RenewOption>Renew option

<Note></Note>Note

<Folder></Folder>Folder information

<FolderId></FolderId>Folder ID

<FolderName></FolderName>Folder name

List Domain Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=list_domain

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<ListDomainInfoResponse>
  <ListDomainInfoHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </ListDomainInfoHeader>
  <ListDomainInfoContent>
    <DomainInfoList>
      <DomainInfo>
        <Domain>
          <Name>domain-exp140.com</Name>
          <Expiration>1361430589062</Expiration>
          <Registration>1234567890123</Registration>
          <NameServerSettings>
            <Type>Dynadot Parking</Type>
            <WithAds>Yes</WithAds>
          </NameServerSettings>
          <Whois>
            <Registrant>
              <ContactId>0</ContactId>
            </Registrant>
            <Admin>
              <ContactId>0</ContactId>
            </Admin>
            <Technical>
              <ContactId>0</ContactId>
            </Technical>
            <Billing>
              <ContactId>0</ContactId>
            </Billing>
          </Whois>
          <Locked>yes</Locked>
          <Disabled>no</Disabled>
          <UdrpLocked>no</UdrpLocked>
          <RegistrantUnverified>no</RegistrantUnverified>
          <Hold>no</Hold>
          <Privacy>none</Privacy>
          <isForSale>no</isForSale>
          <RenewOption>no renew option</RenewOption>
          <Note/>
          <Folder>
            <FolderId>-1</FolderId>
            <FolderName>(no folder)</FolderName>
          </Folder>
        </Domain>
        <Domain>
          <Name>domain-exp141.com</Name>
          <Expiration>1361430589062</Expiration>
          <Registration>1234567890123</Registration>
          <NameServerSettings>
            <Type>Dynadot Parking</Type>
            <WithAds>Yes</WithAds>
          </NameServerSettings>
          <Whois>
            <Registrant>
              <ContactId>1</ContactId>
            </Registrant>
            <Admin>
              <ContactId>2</ContactId>
            </Admin>
            <Technical>
              <ContactId>3</ContactId>
            </Technical>
            <Billing>
              <ContactId>4</ContactId>
            </Billing>
          </Whois>
          <Locked>yes</Locked>
          <Disabled>no</Disabled>
          <UdrpLocked>no</UdrpLocked>
          <RegistrantUnverified>no</RegistrantUnverified>
          <Hold>no</Hold>
          <Privacy>none</Privacy>
          <isForSale>no</isForSale>
          <RenewOption>no renew option</RenewOption>
          <Note/>
          <Folder>
            <FolderId>-1</FolderId>
            <FolderName>(no folder)</FolderName>
          </Folder>
        </Domain>
      </DomainInfo>
    </DomainInfoList>
  </ListDomainInfoContent>
</ListDomainInfoResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=list_domain

Response (JSON format)

{
  "ListDomainInfoResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "MainDomains": [
      {
        "Name": "domain-exp140.com",
        "Expiration": "1361430589062",
        "Registration": "1234567890123",
        "NameServerSettings": {
          "Type": "Dynadot Parking",
          "WithAds": "Yes"
        },
        "Whois": {
          "Registrant": {
            "ContactId": "0"
          },
          "Admin": {
            "ContactId": "0"
          },
          "Technical": {
            "ContactId": "0"
          },
          "Billing": {
            "ContactId": "0"
          }
        },
        "Locked": "yes",
        "Disabled": "no",
        "UdrpLocked": "no",
        "RegistrantUnverified": "no",
        "Hold": "no",
        "Privacy": "none",
        "isForSale": "no",
        "RenewOption": "no renew option",
        "Note": "",
        "Folder": {
          "FolderId": "-1",
          "FolderName": "(no folder)"
        }
      },
      {
        "Name": "domain-exp141.com",
        "Expiration": "1361430589062",
        "Registration": "1234567890123",
        "NameServerSettings": {
          "Type": "Dynadot Parking",
          "WithAds": "Yes"
        },
        "Whois": {
          "Registrant": {
            "ContactId": "1"
          },
          "Admin": {
            "ContactId": "2"
          },
          "Technical": {
            "ContactId": "3"
          },
          "Billing": {
            "ContactId": "4"
          }
        },
        "Locked": "yes",
        "Disabled": "no",
        "UdrpLocked": "no",
        "RegistrantUnverified": "no",
        "Hold": "no",
        "Privacy": "none",
        "isForSale": "no",
        "RenewOption": "no renew option",
        "Note": "",
        "Folder": {
          "FolderId": "-1",
          "FolderName": "(no folder)"
        }
      }
    ]
  }
}

Lock Domain Command

Support multi-thread

If calling lock domain command, the following parameters should be included:

Lock Domain Request ParameterExplanation

Lock Domain Request Parameter
Explanation

domainThe domain name you want to lock for, only 1 domain can be entered per request

Result XML tagExplanation

Result XML tag
Explanation

<LockDomainResponse></LockDomainResponse>Root node of the response XML documentXML document

<LockDomainHeader></LockDomainHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Lock Domain Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=lock_domain&domain=domain4.com

Response (XML format)

<LockDomainResponse>
   <LockDomainHeader>
      <SuccessCode>0</SuccessCode>
      <Status>success</Status>
   </LockDomainHeader>
</LockDomainResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=lock_domain&domain=domain4.com

Response (JSON format)

{
   "LockDomainResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Cancel Transfer Command

Support multi-thread

The Command allows you to cancel a transfer item in the order. If calling cancel transfer command, the following parameters should be included:

Cancel Transfer Request ParameterExplanation

Cancel Transfer Request Parameter
Explanation

domainThe domain name you want to cancel transfer for, only 1 domain can be entered per request

order_idThe transfer order id, you can get it from another api get_transfer_status.

Result XML tagExplanation

Result XML tag
Explanation

<CancelTransferResponse></CancelTransferResponse>Root node of the response XML documentXML document

<CancelTransferHeader></CancelTransferHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Cancel Transfer Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=cancel_transfer&domain=domain4.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<CancelTransferResponse>
  <CancelTransferHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </CancelTransferHeader>
</CancelTransferResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=cancel_transfer&domain=domain4.com

Response (JSON format)

{
  "CancelTransferResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Get Transfer Status Command

Support multi-thread

If calling get transfer status command, the following parameters should be included:

Get Transfer Status Request ParameterExplanation

Get Transfer Status Request Parameter
Explanation

domainThe domain name you want to get transfer status for, only 1 domain can be entered per request

transfer_typeThe transfer type you want to get transfer status for (transfer in or transfer away)

Result XML tagExplanation

Result XML tag
Explanation

<GetTransferStatusResponse></GetTransferStatusResponse>Root node of the response XML documentXML document

<GetTransferStatusHeader></GetTransferStatusHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetTransferStatusContent></GetTransferStatusContent>Response content

<TransferList></TransferList>Transfer list

<Transfer></Transfer>Transfer info

<OrderId></OrderId>The order id

<TransferStatus></TransferStatus>The transfer status of domain.If you got 'none' or 'approved', you can cancel the transfer.If you got 'waiting', means transfer already start.If you got 'auth code needed', means bad auth code, you can use another api SET_TRANSFER_AUTH re-submit auth code.There are also some other statuses, we will send you an email or needs to be checked by our engineers.

Get Transfer Status Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_transfer_status&domain=domian1.com&transfer_type=in

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetTransferStatusResponse>
  <GetTransferStatusHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetTransferStatusHeader>
  <GetTransferStatusContent>
    <TransferList>
      <Transfer>
        <OrderId>testorderid</OrderId>
        <TransferStatus>teststatus</TransferStatus>
      </Transfer>
      <Transfer>
        <OrderId>testorderid2</OrderId>
        <TransferStatus>teststatus2</TransferStatus>
      </Transfer>
    </TransferList>
  </GetTransferStatusContent>
</GetTransferStatusResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_transfer_status&domain=domian1.com&transfer_type=in

Response (JSON format)

{
  "GetTransferStatusResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "TransferList": [
      {
        "OrderId": "testorderid",
        "TransferStatus": "teststatus"
      },
      {
        "OrderId": "testorderid2",
        "TransferStatus": "teststatus2"
      }
    ]
  }
}

Set Transfer Auth Code For Transfer Order Command

Support multi-thread

The command which allows you to update auth code for processing transfer orders. If calling set transfer auth code command, the following parameters should be included:

Set Transfer Auth Code Request ParameterExplanation

Set Transfer Auth Code Request Parameter
Explanation

domainThe domain name you update the transfer auth for, only 1 domain can be entered per request

auth_codeThe auth_code you want to re-submit

order_idThe transfer order id, you can get it from another api get_transfer_status.

Result XML tagExplanation

Result XML tag
Explanation

<GetTransferStatusResponse></GetTransferStatusResponse>Root node of the response XML documentXML document

<GetTransferStatusHeader></GetTransferStatusHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Transfer Auth Code Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_transfer_auth_code&domain=domain4.com&auth_code=testauthcode

Response (XML format)

<SetTransferAuthCodeResponse>
   <SetTransferAuthCodeHeader>
      <SuccessCode>0</SuccessCode>
      <Status>success</Status>
   </SetTransferAuthCodeHeader>
</SetTransferAuthCodeResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_transfer_auth_code&domain=domain4.com&auth_code=testauthcode

Response (JSON format)

{
   "SetTransferAuthCodeResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Authorize Transfer Away Command

Support multi-thread

Authorize Transfer Away Request ParameterExplanation

Authorize Transfer Away Request Parameter
Explanation

domainThe domain name you want to authorize transfer away for, only 1 domain can be entered per request

order_idThe Dynadot order_id of the domain you want to transfer away

authorizeTo authorize the transfer away, set it equal to "approve". To deny the transfer away, set it equal to "deny".

Result XML tagExplanation

Result XML tag
Explanation

<AuthorizeTransferAwayResponse></AuthorizeTransferAwayResponse>Root node of the response XML documentXML document

<AuthorizeTransferAwayHeader></AuthorizeTransferAwayHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<Result></Result>The result of authorize transfer away

Authorize Transfer Away Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=authorize_transfer_away&domain=domain.com&authorize=approve&order_id=123

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<AuthorizeTransferAwayResponse>
  <AuthorizeTransferAwayHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
    <Result>away_approved</Result>
  </AuthorizeTransferAwayHeader>
</AuthorizeTransferAwayResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=authorize_transfer_away&domain=domain.com&authorize=approve&order_id=123

Response (JSON format)

{
  "AuthorizeTransferAwayResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Result": "away_approved"
  }
}

Get Transfer Auth Code Command

Support multi-thread

You must unlock your domain and account before requesting auth code.

Get Transfer Auth Code Request ParameterExplanation

Get Transfer Auth Code Request Parameter
Explanation

domainThe domain name you want to get transfer auth code for, only 1 domain can be entered per request

new_code (optional)Generate a new transfer auth code

unlock_domain_for_transfer (Optional. Requires api skip lock agreement to use)If you want to unlock domain for transfer, set it equal to "1". If the request successfully processed, the domain will be unlocked.

Result XML tagExplanation

Result XML tag
Explanation

<GetTransferAuthCodeResponse></GetTransferAuthCodeResponse>Root node of the response XML documentXML document

<GetTransferAuthCodeHeader></GetTransferAuthCodeHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<AuthCode></AuthCode>Auth code is used to start a domain transfer.

Get Transfer Auth Code Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_transfer_auth_code&domain=domian1.com&new_code=1&unlock_domain_for_transfer=1

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetTransferAuthCodeResponse>
  <GetTransferAuthCodeHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
    <AuthCode>testauthcode</AuthCode>
  </GetTransferAuthCodeHeader>
</GetTransferAuthCodeResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_transfer_auth_code&domain=domian1.com&new_code=1&unlock_domain_for_transfer=1

Response (JSON format)

{
  "GetTransferAuthCodeResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "AuthCode": "testauthcode"
  }
}

Get Domain Push Request Command

Support multi-thread

Calling the Get Domain Push Request Command will get domain push request. This command is only available in XML and JSON format.

Get Domain Push Request Request ParameterExplanation

Get Domain Push Request Request Parameter
Explanation

N/A No extra parameter needed

Result XML tagExplanation

Result XML tag
Explanation

<GetDomainPushRequestResponse></GetDomainPushRequestResponse>the root node of the response

<GetDomainPushRequestHeader></GetDomainPushRequestHeader>Get Domain Push Request header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetDomainPushRequestContent></GetDomainPushRequestContent>response content

<PushDomain></PushDomain>Push Domain

<PushDomainName></PushDomainName>Push Domain Name

Get Domain Push Request Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_domain_push_request

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetDomainPushRequestResponse>
  <GetDomainPushRequestHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </GetDomainPushRequestHeader>
  <GetDomainPushRequestContent>
    <PushDomain>
      <PushDomainName>haha.com</PushDomainName>
    </PushDomain>
    <PushDomain>
      <PushDomainName>haha1.com</PushDomainName>
    </PushDomain>
  </GetDomainPushRequestContent>
</GetDomainPushRequestResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_domain_push_request

Response (JSON format)

{
  "GetDomainPushRequestResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "pushDomainName": "[haha.com,haha1.com]"
  }
}

Set Domain Push Request Command

Support multi-thread

Calling the Set Domain Push Request Command will set domain push request. This command is only available in XML and JSON format.If calling this command, the following parameters should be included:

Set Domain Push Request Request ParameterExplanation

Set Domain Push Request Request Parameter
Explanation

domainsThe domain name of the order to be processed

actionThe action of the order to be processed,You can choose "accept" or "decline"

Result XML tagExplanation

Result XML tag
Explanation

<SetDomainPushRequestResponse></SetDomainPushRequestResponse>the root node of the response

<SetDomainPushRequestHeader></SetDomainPushRequestHeader>Set Domain Push Request header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Domain Push Request Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_domain_push_request&domains=domain-haha1.com,domain-haha2.com,domain-haha3.com&action=accept

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetDomainPushRequestResponse>
  <SetDomainPushRequestHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </SetDomainPushRequestHeader>
  <SetDomainPushRequestContent/>
</SetDomainPushRequestResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_domain_push_request&domains=domain-haha1.com,domain-haha2.com,domain-haha3.com&action=accept

Response (JSON format)

{
  "SetDomainPushRequestResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Create CN Audit Command

Support multi-thread

The Command allows you to create a CN audit for a contact. If calling create cn audit command, the following parameters should be included:

Create CN Audit Request ParameterExplanation

Create CN Audit Request Parameter
Explanation

contact_idThe contact record id you want start audit for, only 1 contact id can be entered per request

contact_typeType of contact, can be either "Individual" or "Enterprise"

individual_id_typeNatural person's ID type, expected values (description of value) are:
JGZ (Officer's identity card of the People's Republic of China)
SFZ (ID card of the People's Republic of China)
HZ (Passport)
GAJMTX (Exit-Entry Permit for Travelling to and from Hong Kong and Macao)
TWJMTX (Travel passes for Taiwan Residents to Enter or Leave the Mainland)
WJLSFZ (Foreign Permanent Resident ID Card of the People's Republic of China)
GAJZZ (Residence permit for Hong Kong, Macao)
TWJZZ (Residence permit for Taiwan residents)
QT (Others)

individual_license_idThe License number of natural person's ID

individual_urlDocument of natural person license ID. The file url on the server. Only jpg, gif, png, jpeg are allowed

enterprise_id_type (Mandatory when contact type is "Enterprise")Enterprise ID type, expected values (description of value) are:
ORG (Organization Code Certificate)
YYZZ (Business License)
TYDM (Certificate for Uniform Social Credit Code)
BDDM (Military Code Designation)
JDDWFW (Military Paid External Service License)
SYDWFR (Public Institution Legal Person Certificate)
WGCZJG (Resident Representative Offices of Foreign Enterprises Registration Form)
SHTTFR (Social Organization Legal Person Registration Certificate)
ZJCS (Religion Activity Site Registration Certificate)
MBFQY (Private Non-Enterprise Entity Registration Certificate)
JJHFR (Fund Legal Person Registration Certificate)
LSZY (Practicing License of Law Firm)
WGZHWH (Registration Certificate of Foreign Cultural Center in China)
WLCZJG (Resident Representative Office of Tourism Departments of Foreign Government Approval Registration Certificate)
SFJD (Judicial Expertise License)
JWJG (Overseas Organization Certificate)
SHFWJG (Social Service Agency Registration Certificate)
MBXXBX (Private School Permit)
YLJGZY (Medical Institution Practicing License)
GZJGZY (Notary Organization Practicing License)
BJWSXX (Beijing School for Children of Foreign Embassy Staff in China Permit)
QTTYDM (Others-Certificate for Uniform Social Credit Code)
QT (Others)

enterprise_license_id (Mandatory when contact type is "Enterprise")The License number of enterprise document

enterprise_url (Mandatory when contact type is "Enterprise")Document of enterprise license. The file url on the server. Only jpg, gif, png, jpeg are allowed

Result XML tagExplanation

Result XML tag
Explanation

<CreateCnAuditResponse></CreateCnAuditResponse>Root node of the response XML document

<CreateCnAuditHeader></CreateCnAuditHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Create Cn Audit Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=create_cn_audit&contact_id=testcontactid&contact_type=Enterprise&individual_id_type=SFZ&individual_license_id=testlicenseid&individual_url=url1&enterprise_id_type=ORG&enterprise_license_id=testlicenseid2&enterprise_url=url2

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<CreateCnAuditResponse>
  <CreateCnAuditHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </CreateCnAuditHeader>
</CreateCnAuditResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=create_cn_audit&contact_id=testcontactid&contact_type=Enterprise&individual_id_type=SFZ&individual_license_id=testlicenseid&individual_url=url1&enterprise_id_type=ORG&enterprise_license_id=testlicenseid2&enterprise_url=url2

Response (JSON format)

{
  "CreateCnAuditResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Get Cn Audit Status Command

Support multi-thread

If calling get cn audit status command, the following parameters should be included:

Get Cn Audit Status Request ParameterExplanation

Get Cn Audit Status Request Parameter
Explanation

contact_idThe contact record id you want to get audit status for, only 1 contactId can be entered per request

gtldIf you query the audit result of the cnnic-gtld, set this parameter to 1

Result XML tagExplanation

Result XML tag
Explanation

<GetCnAuditStatusResponse></GetCnAuditStatusResponse>Root node of the response XML documentXML document

<GetCnAuditStatusHeader></GetCnAuditStatusHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<CnAuditStatus></CnAuditStatus>the audit status of cnnic audit record. You may got 'processing' or 'waiting for cnnic' or 'failed'. If failed, we will send you an email.

<FailedReason></FailedReason>If the audit unpassable, the failed reason will be displayed

Get Cn Audit Status Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_cn_audit_status&contact_id=testcontactid

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetCnAuditStatusResponse>
  <GetCnAuditStatusHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
    <CnAuditStatus>pass</CnAuditStatus>
  </GetCnAuditStatusHeader>
</GetCnAuditStatusResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_cn_audit_status&contact_id=testcontactid

Response (JSON format)

{
  "GetCnAuditStatusResponse": {
    "ResponseCode": "0",
    "Status": "success",
    "CnAuditStatus": "pass"
  }
}

Create Contact Command

Support multi-thread

If calling create contact command, the following parameters should be included:

Create Contact Request ParameterExplanation

Create Contact Request Parameter
Explanation

organization (optional)The organization information

nameName

emailEmail

phonenumPhone number

phoneccPhone country code

faxnum (optional)Fax number

faxcc (optional)Fax country code

address1Address1

address2 (optional)Address 2

cityCity

state (optional)State

zipZip code

countryCountry

Result XML tagExplanation

Result XML tag
Explanation

<CreateContactResponse></CreateContactResponse>Root node of the response XML document

<CreateContactHeader></CreateContactHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<CreateContactContent></CreateContactContent>New Contact ID, only used when status is "success"

Create Contact Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=create_contact&name=Webb&[email protected]&phonenum=8662623399&phonecc=1&address1=PO Box 345&city=San Mateo&state=America&zip=94401&country=US

Response (XML format)

<CreateContactResponse>
  <CreateContactHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </CreateContactHeader>
  <CreateContactContent>
    <ContactId>1234</ContactId>
  </CreateContactContent>
</CreateContactResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=create_contact&name=Webb&[email protected]&phonenum=8662623399&phonecc=1&address1=PO Box 345&city=San Mateo&state=America&zip=94401&country=US

Response (JSON format)

{
   "CreateContactResponse":{
      "ResponseCode":"0",
      "Status":"success",
      "CreateContactContent":{
         "ContactId":"0"
      }
   }
}

Edit Contact Command

Support multi-thread

If calling edit contact command, the following parameters should be included:

Edit Contact Request ParameterExplanation

Edit Contact Request Parameter
Explanation

contact_idThe contact's ID you want to edit

organization (optional)The organization information

nameName

emailEmail

phonenumPhone number

phoneccPhone country code

faxnum (optional)Fax number

faxcc (optional)Fax country code

address1Address 1

address2 (optional)Address 2

cityCity

stateState

zipZip code

countryCountry

Result XML tagExplanation

Result XML tag
Explanation

<EditContactResponse></EditContactResponse>Root node of the response XML document

<EditContactHeader></EditContactHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<EditContactContent></EditContactContent>Response content

<ContactId></ContactId>ID of the contact

Edit Contact Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=edit_contact&contact_id=0&name=Webb&[email protected]&phonenum=8662623399&phonecc=1&address1=PO Box 345&city=San Mateo&state=U.S&zip=94401&country=US

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<EditContactResponse>
  <EditContactHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </EditContactHeader>
  <EditContactContent>
    <ContactId>0</ContactId>
  </EditContactContent>
</EditContactResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=edit_contact&contact_id=0&name=Webb&[email protected]&phonenum=8662623399&phonecc=1&address1=PO Box 345&city=San Mateo&state=U.S&zip=94401&country=US

Response (JSON format)

{
  "EditContactResponse": {
    "ResponseCode": "0",
    "Status": "success",
    "EditContactContent": {
      "ContactId": "0"
    }
  }
}

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=edit_contact&contact_id=0&name=Webb&[email protected]&phonenum=8662623399&phonecc=1&address1=PO Box 345&city=San Mateo&state=U.S&zip=94401&country=US

Response (CSV format)

ok,

success,
,

Delete Contact Command

Support multi-thread

If calling delete contact command, the following parameters should be included:

Delete Contact Request ParameterExplanation

Delete Contact Request Parameter
Explanation

contact_idThe ID of the contact you want to delete, make sure they are separated by commas

Result XML tagExplanation

Result XML tag
Explanation

<DeleteContactResponse></DeleteContactResponse>Root node of the response XML document

<DeleteContactHeader></DeleteContactHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Delete Contact Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=delete_contact&contact_id=0

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<DeleteContactResponse>
  <DeleteContactHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </DeleteContactHeader>
</DeleteContactResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=delete_contact&contact_id=0

Response (JSON format)

{
  "DeleteContactResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Contact List Command

Support multi-thread

This command is only available in XML and JSON format:

Contact List Request ParameterExplanation

Contact List Request Parameter
Explanation

N/ANo extra parameter needed

Result XML tagExplanation

Result XML tag
Explanation

<ContactListResponse></ContactListResponse>Root node of the response XML document

<ContactListHeader></ContactListHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<ContactListContent></ContactListContent>Response content

<ContactList></ContactList>Contact list

<Contact></Contact>Contact info

<ContactId></ContactId>Contact ID

<Organization></Organization>Contact's organization

<Name></Name>Name

<Email></Email>Email

<PhoneCc></PhoneCc>Phone country code

<PhoneNum></PhoneNum>Phone number

<FaxCc></FaxCc>Fax country code

<FaxNum></FaxNum>Fax number

<Address1></Address1>Address 1

<Address2></Address2>Address 2

<City></City>City

<State></State>State

<ZipCode></ZipCode>Zip code

<Country></Country>Country

<GtldVerified></GtldVerified>gTLD verification status

Contact List Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=contact_list

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<ContactListResponse>
  <ContactListHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </ContactListHeader>
  <ContactListContent>
    <ContactList>
      <Contact>
        <ContactId>0</ContactId>
        <Organization/>
        <Name>Jack tester</Name>
        <Email>[email protected]</Email>
        <PhoneCc>1</PhoneCc>
        <PhoneNum>555.555.5233</PhoneNum>
        <FaxCc/>
        <FaxNum/>
        <Address1>test street</Address1>
        <Address2/>
        <City>Los Angeles</City>
        <State>CA</State>
        <ZipCode>90068</ZipCode>
        <Country>US</Country>
        <GtldVerified>no</GtldVerified>
      </Contact>
      <Contact>
        <ContactId>1</ContactId>
        <Organization/>
        <Name>John tester</Name>
        <Email>[email protected]</Email>
        <PhoneCc>1</PhoneCc>
        <PhoneNum>123.456.7890</PhoneNum>
        <FaxCc>1</FaxCc>
        <FaxNum>123.456.7890</FaxNum>
        <Address1>high Way first</Address1>
        <Address2/>
        <City>San Francisco</City>
        <State>CA</State>
        <ZipCode>90068</ZipCode>
        <Country>US</Country>
        <GtldVerified>yes</GtldVerified>
      </Contact>
    </ContactList>
  </ContactListContent>
</ContactListResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=contact_list

Response (JSON format)

{
  "ContactListResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "ContactList": [
      {
        "ContactId": "0",
        "Organization": "",
        "Name": "Jack tester",
        "Email": "[email protected]",
        "PhoneCc": "1",
        "PhoneNum": "555.555.5233",
        "FaxCc": "",
        "FaxNum": "",
        "Address1": "test street",
        "Address2": "",
        "City": "Los Angeles",
        "State": "CA",
        "ZipCode": "90068",
        "Country": "US",
        "GtldVerified": "no"
      },
      {
        "ContactId": "1",
        "Organization": "",
        "Name": "John tester",
        "Email": "[email protected]",
        "PhoneCc": "1",
        "PhoneNum": "123.456.7890",
        "FaxCc": "1",
        "FaxNum": "123.456.7890",
        "Address1": "high Way first",
        "Address2": "",
        "City": "San Francisco",
        "State": "CA",
        "ZipCode": "90068",
        "Country": "US",
        "GtldVerified": "yes"
      }
    ]
  }
}

Get Contact Command

Support multi-thread

This command is only available in XML and JSON format:

Get Contact Request ParameterExplanation

Get Contact Request Parameter
Explanation

contact_idid of contact

Result XML tagExplanation

Result XML tag
Explanation

<GetContactResponse></GetContactResponse>Root node of the response XML document

<GetContactHeader></GetContactHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetContactContent></GetContactContent>Response content

<Contact></Contact>Contact info

<ContactId></ContactId>Contact ID

<Organization></Organization>Contact's organization

<Name></Name>Name

<Email></Email>Email

<PhoneCc></PhoneCc>Phone country code

<PhoneNum></PhoneNum>Phone number

<FaxCc></FaxCc>Fax country code

<FaxNum></FaxNum>Fax number

<Address1></Address1>Address 1

<Address2></Address2>Address 2

<City></City>City

<State></State>State

<ZipCode></ZipCode>Zip code

<Country></Country>Country

<GtldVerified></GtldVerified>gTLD verification status

Get Contact Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_contact&contact_id=10000

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetContactResponse>
  <GetContactHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </GetContactHeader>
  <GetContactContent>
    <GetContact>
      <Contact>
        <ContactId>12345</ContactId>
        <Organization>org</Organization>
        <Name>name</Name>
        <Email>[email protected]</Email>
        <PhoneCc>1</PhoneCc>
        <PhoneNum>555.555.5233</PhoneNum>
        <FaxCc/>
        <FaxNum/>
        <Address1>address1</Address1>
        <Address2>address2</Address2>
        <City>city</City>
        <State>state</State>
        <ZipCode>zipcode</ZipCode>
        <Country>country</Country>
        <GtldVerified>no</GtldVerified>
      </Contact>
    </GetContact>
  </GetContactContent>
</GetContactResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_contact&contact_id=10000

Response (JSON format)

{
  "GetContactResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "GetContact": {
      "ContactId": "12345",
      "Organization": "org",
      "Name": "name",
      "Email": "[email protected]",
      "PhoneCc": "1",
      "PhoneNum": "555.555.5233",
      "FaxCc": "",
      "FaxNum": "",
      "Address1": "address1",
      "Address2": "address2",
      "City": "city",
      "State": "state",
      "ZipCode": "zipcode",
      "Country": "country",
      "GtldVerified": "no"
    }
  }
}

Set Contact EU Setting Command

Support multi-thread

If calling set contact eu setting command, the following parameters should be included:

Set Contact EU Setting Request ParameterExplanation

Set Contact EU Setting Request Parameter
Explanation

contact_idThe contact's ID you want to edit

country_of_citizenshipMust be an EU member state, The country codes of member states include :
AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IS, IE, IT, LV, LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE

Result XML tagExplanation

Result XML tag
Explanation

<SetContactEUSettingResponse></SetContactEUSettingResponse>Root node of the response XML document

<SetContactEUSettingHeader></SetContactEUSettingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<SetContactEUSettingContent></SetContactEUSettingContent>Response content

<ContactId></ContactId>ID of the contact

Set Contact EU Setting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_contact_eu_setting&contact_id=0&country_of_citizenship=AT

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetContactEUSettingResponse>
  <SetContactEUSettingHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </SetContactEUSettingHeader>
  <SetContactEUSettingContent>
    <ContactId>0</ContactId>
  </SetContactEUSettingContent>
</SetContactEUSettingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_contact_eu_setting&contact_id=0&country_of_citizenship=AT

Response (JSON format)

{
  "SetContactEUSettingResponse": {
    "ResponseCode: ": "0",
    "Status": "Success",
    "SetContactEUSettingContent": {
      "ContactId: ": "0"
    }
  }
}

Set Contact LV Setting Command

Support multi-thread

If calling set contact lv setting command, the following parameters should be included:

Set Contact LV Setting Request ParameterExplanation

Set Contact LV Setting Request Parameter
Explanation

contact_idThe contact's ID you want to edit

registration_number- For individual, Please enter Latvian identification number.
- For companies and other legal entities, please enter registration number issued by the Latvian Register of Enterprises.

vat_number (optional)VAT number for foreign legal entities registered within European Union countries (this includes also Latvian companies)

Result XML tagExplanation

Result XML tag
Explanation

<SetContactLvSettingResponse></SetContactLvSettingResponse>Root node of the response XML document

<SetContactLvSettingHeader></SetContactLvSettingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<SetContactLvSettingContent></SetContactLvSettingContent>Response content

<ContactId></ContactId>ID of the contact

Set Contact Lv Setting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_contact_lv_setting&contact_id=0&registration_number=test_reg_number&vat_number=test_vat_number

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetContactLvSettingResponse>
  <SetContactLvSettingHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </SetContactLvSettingHeader>
  <SetContactLvSettingContent>
    <ContactId>0</ContactId>
  </SetContactLvSettingContent>
</SetContactLvSettingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_contact_lv_setting&contact_id=0&registration_number=test_reg_number&vat_number=test_vat_number

Response (JSON format)

{
  "SetContactLvSettingResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "SetContactLvSettingContent": {
      "ContactId: ": "0"
    }
  }
}

Set Contact LV Setting Example

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=set_contact_lv_setting&contact_id=0&registration_number=test_reg_number&vat_number=test_vat_number

Response (CSV format)

ok,success,0

Get Name Server Command

Support multi-thread

If calling get name server command, the following parameters should be included:

Get Name Server Request ParameterExplanation

Get Name Server Request Parameter
Explanation

domainThe domain whose name server info you want to get, only 1 domain's name server info can be pulled per request.

Result XML tagExplanation

Result XML tag
Explanation

<GetNsResponse></GetNsResponse>Root node of the response XML document

<GetNsHeader></GetNsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<NsContent></NsContent>Response content

<Host></Host>Host name of the server

<NsName></NsName>Name of the server

Get Ns Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_ns&domain=mydomain.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetNsResponse>
  <GetNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetNsHeader>
  <NsContent>
    <Host>ns1.mydomain.com</Host>
    <Host>ns2.mydomain.com</Host>
  </NsContent>
</GetNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_ns&domain=mydomain.com

Response (JSON format)

{
  "GetNsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "NsContent": {
      "Host0": "ns1.mydomain.com",
      "Host1": "ns2.mydomain.com"
    }
  }
}

Add Name Server Command

Support multi-thread

If calling add name server command, the following parameters should be included:

Add Name Server Request ParameterExplanation

Add Name Server Request Parameter
Explanation

hostThe host name of name server you want to add

Result XML tagExplanation

Result XML tag
Explanation

<AddNsResponse></AddNsResponse>Root node of the response XML document

<AddNsHeader></AddNsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<AddNsContent></AddNsContent>Response content

<Server></Server>Server you have set

<Host></Host>Host name of the new server

<ServerId></ServerId>ID of the new server

Add Ns Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=add_ns&host=ns1.mydomain.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<AddNsResponse>
  <AddNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </AddNsHeader>
  <AddNsContent>
    <Server>
      <Host>ns1.mydomain.com</Host>
      <ServerId>0</ServerId>
    </Server>
  </AddNsContent>
</AddNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=add_ns&host=ns1.mydomain.com

Response (JSON format)

{
  "AddNsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "AddNsContent": {
      "Server": {
        "Host": "ns1.mydomain.com",
        "ServerId": 0
      }
    }
  }
}

Support multi-thread

If calling the register name server command, the following parameters should be included:

hostThe host name of your own name server

ipThe IP address of your own name server

Result XML tagExplanation

Result XML tag
Explanation

<RegisterNsResponse></RegisterNsResponse>Root node of the response XML document

<RegisterNsHeader></RegisterNsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<RegisterNsContent></RegisterNsContent>Response content

<Server></Server>Server tag

<Host></Host>Host name

<ServerId></ServerId>Server ID

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=register_ns&host=domain1.com&ip=192.168.1.1

Response (XML format)

<RegisterNsResponse>
  <RegisterNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </RegisterNsHeader>
  <RegisterNsContent>
    <Server>
      <Host>domain1.com</Host>
      <ServerId>0</ServerId>
    </Server>
  </RegisterNsContent>
</RegisterNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=register_ns&host=domain1.com&ip=192.168.1.1

Response (JSON format)

{
   "RegisterNsResponse":{
      "ResponseCode":"0",
      "Status":"success",
      "RegisterNsContent":{
         "Server":{
            "Host":"ndomain1.com",
            "ServerId":"0"
         }
      }
   }
}

Set Name Server IP Command

Support multi-thread

If calling set name server IP command, the following parameters should be included:

Set Name Server IP Request ParameterExplanation

Set Name Server IP Request Parameter
Explanation

server_idThe name server's ID you want to set

ip0 - ip9The IP address you want to set to the name server, 9 IPs can be set per request and need to be separated by commas

Result XML tagExplanation

Result XML tag
Explanation

<SetNsIpResponse></SetNsIpResponse>Root node of the response XML document

<SetNsIpHeader></SetNsIpHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Name Server IP Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_ns_ip&server_id=1&ip0=192.168.1.1

Response (XML format)

<SetNsIpResponse>
  <SetNsIpHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetNsIpHeader>
</SetNsIpResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_ns_ip&server_id=1&ip0=192.168.1.1

Response (JSON format)

{
   "SetNsIpResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Delete Name Server Command

Support multi-thread

If calling delete name server command, the following parameters should be included:

Delete Name Server Request ParameterExplanation

Delete Name Server Request Parameter
Explanation

server_idThe ID of name servers you want to delete, make sure that they are separated by commas

Result XML tagExplanation

Result XML tag
Explanation

<DeleteNsResponse></DeleteNsResponse>Root node of the response XML document

<DeleteNsHeader></DeleteNsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Delete Ns Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=delete_ns&server_id=0

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<DeleteNsResponse>
  <DeleteNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </DeleteNsHeader>
</DeleteNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=delete_ns&server_id=0

Response (JSON format)

{
  "DeleteNsResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Delete Name Server By Domain Command

Support multi-thread

If calling delete name server by domain command, the following parameters should be included:

Delete Name Server By Domain Request ParameterExplanation

Delete Name Server By Domain Request Parameter
Explanation

server_domainName of the name server. ex: ns1.testnameserver.com

Result XML tagExplanation

Result XML tag
Explanation

<DeleteNsResponse></DeleteNsResponse>Root node of the response XML document

<DeleteNsHeader></DeleteNsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Delete Name Server By Domain Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=delete_ns_by_domain&server_domain=ns1.testnameserver.com

Response (XML format)

<DeleteNsResponse>
  <DeleteNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </DeleteNsHeader>
</DeleteNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=delete_ns_by_domain&server_domain=ns1.testnameserver.com

Response (JSON format)

{
   "DeleteNsResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Server List Command

Support multi-thread

This command is only available in XML and JSON format:

Server List Request ParameterExplanation

Server List Request Parameter
Explanation

N/ANo extra parameter needed

Result XML tagExplanation

Result XML tag
Explanation

<ServerListResponse></ServerListResponse>Root node of the response XML document

<ServerListHeader></ServerListHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<ServerListContent></ServerListContent>Response content

<NameServerList></NameServerList>Name server list

<ServerId></ServerId>Server ID

<ServerName></ServerName>Server name

<ServerIp></ServerIp>Server IP

Server List Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=server_list

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<ServerListResponse>
  <ServerListHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </ServerListHeader>
  <ServerListContent>
    <NameServerList>
      <List>
        <Server>
          <ServerId>0</ServerId>
          <ServerName>ns1.com</ServerName>
        </Server>
        <Server>
          <ServerId>1</ServerId>
          <ServerName>domain1.com</ServerName>
          <ServerIp>192.168.1.1</ServerIp>
          <ServerIp>1.1.1.1</ServerIp>
        </Server>
      </List>
    </NameServerList>
  </ServerListContent>
</ServerListResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=server_list

Response (JSON format)

{
  "ServerListResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "ServerList": [
      {
        "ServerId": "0",
        "ServerName": "ns1.com"
      },
      {
        "ServerId": "1",
        "ServerName": "domain1.com",
        "ServerIps": [
          {
            "Ip": "192.168.1.1"
          },
          {
            "Ip": "1.1.1.1"
          }
        ]
      }
    ]
  }
}

Get Domain NameServer Settings Command

Support multi-thread

If calling get domain nameservers settings command, the following parameters should be included:

Get Domain Nameserver Settings Request ParameterExplanation

Get Domain Nameserver Settings Request Parameter
Explanation

domainThe domain whose name server setting you want to get, only 1 domain's name server setting can be pulled per request.

Result XML tagExplanation

Result XML tag
Explanation

<GetDnsResponse></GetDnsResponse>Root node of the response XML document

<GetDnsHeader></GetDnsHeader>Response header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetDnsContent></GetDnsContent>Response content

<NameServerSettings></NameServerSettings>Domain's name server settings

<Type></Type>Domain's name server type

Get Domain Nameserver Settings Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_dns&domain=mydomain.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetDnsResponse>
  <GetDnsHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </GetDnsHeader>
  <GetDnsContent>
    <NameServerSettings>
      <Type>Dynadot Parking</Type>
      <WithAds>Yes</WithAds>
    </NameServerSettings>
  </GetDnsContent>
</GetDnsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_dns&domain=mydomain.com

Response (JSON format)

{
  "GetDnsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "GetDns": {
      "NameServerSettings": {
        "Type": "Dynadot Parking",
        "WithAds": "Yes"
      }
    }
  }
}

Account Information Command

Support multi-thread

This command is only available in XML and JSON format:

Account Info Request ParameterExplanation

Account Info Request Parameter
Explanation

N/ANo extra parameter needed

Result XML tagExplanation

Result XML tag
Explanation

<AccountInfoResponse></AccountInfoResponse>Root node of the response XML document

<AccountInfoHeader></AccountInfoHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<AccountInfoContent></AccountInfoContent>Response content

<AccountInfo></AccountInfo>Account information

<Username></Username>Username

<ForumName></ForumName>Forum name

<Contact></Contact>Contact info

<Organization></Organization>Organization

<Organization></Organization>Response header

<Name></Name>Your name

<Email></Email>Email

<PhoneCc></PhoneCc>Phone country code

<PhoneNum></PhoneNum>Phone number

<Address1></Address1>Address 1

<Address2></Address2>Address 2

<City></City>City

<State></State>State

<ZipCode></ZipCode>Zip code

<Country></Country>Country

<CustomerSince></CustomerSince>Customer since

<AccountLock></AccountLock>Account lock

<TotalSpending></TotalSpending>Total spending

<PriceLevel></PriceLevel>Price level

<AccountBalance></AccountBalance>Account balance

<CustomTimeZone></CustomTimeZone>Custom time zone

<DefaultSettings></DefaultSettings>Default settings

<DefaultWhois></DefaultWhois>Default Whois

<DefaultRegistrant></DefaultRegistrant>Default registrant

<ContactId></ContactId>Contact ID

<DefaultAdmin></DefaultAdmin>Default admin

<DefaultTechnical></DefaultTechnical>Default technical

<DefaultBilling></DefaultBilling>Default billing

<Type></Type>Name server type

<WithAds></WithAds>With ads or not

Account Information Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=account_info

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<AccountInfoResponse>
  <AccountInfoHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </AccountInfoHeader>
  <AccountInfoContent>
    <AccountInfo>
      <Username>testname</Username>
      <ForumName>test forum name</ForumName>
      <AvatarUrl>test avatar url</AvatarUrl>
      <Contact>
        <Organization/>
        <Name>testname test</Name>
        <Email>[email protected]</Email>
        <PhoneCc>1</PhoneCc>
        <PhoneNum>555.555.5233</PhoneNum>
        <FaxCc/>
        <FaxNum/>
        <Address1>1 test road</Address1>
        <Address2/>
        <City>Los Angeles</City>
        <State>CA</State>
        <ZipCode>90000</ZipCode>
        <Country>US</Country>
      </Contact>
      <CustomerSince>1364888735253</CustomerSince>
      <AccountLock>on</AccountLock>
      <TotalSpending>$0.00</TotalSpending>
      <PriceLevel>Regular Pricing</PriceLevel>
      <AccountBalance>$70.02</AccountBalance>
      <CustomTimeZone>PST</CustomTimeZone>
      <DefaultSettings>
        <DefaultWhois>
          <DefaultRegistrant>
            <ContactId>0</ContactId>
          </DefaultRegistrant>
          <DefaultAdmin>
            <ContactId>0</ContactId>
          </DefaultAdmin>
          <DefaultTechnical>
            <ContactId>0</ContactId>
          </DefaultTechnical>
          <DefaultBilling>
            <ContactId>0</ContactId>
          </DefaultBilling>
        </DefaultWhois>
        <DefaultNameServerSettings>
          <Type>Dynadot Parking</Type>
          <WithAds>yes</WithAds>
        </DefaultNameServerSettings>
      </DefaultSettings>
    </AccountInfo>
  </AccountInfoContent>
</AccountInfoResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=account_info

Response (JSON format)

{
  "AccountInfoResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "AccountInfo": {
      "Username": "testname",
      "ForumName": "test forum name",
      "AvatarUrl": "test avatar url",
      "Contact": {
        "Organization": "",
        "Name": "testname test",
        "Email": "[email protected]",
        "PhoneCc": "1",
        "PhoneNum": "555.555.5233",
        "FaxCc": "",
        "FaxNum": "",
        "Address1": "1 test road",
        "Address2": "",
        "City": "Los Angeles",
        "State": "CA",
        "ZipCode": "90000",
        "Country": "US"
      },
      "CustomerSince": "1364888735253",
      "AccountLock": "on",
      "TotalSpending": "$0.00",
      "PriceLevel": "Regular Pricing",
      "AccountBalance": "$70.02",
      "CustomTimeZone": "PST",
      "DefaultSettings": {
        "DefaultWhois": {
          "DefaultRegistrant": {
            "ContactId": "0"
          },
          "DefaultAdmin": {
            "ContactId": "0"
          },
          "DefaultTechnical": {
            "ContactId": "0"
          },
          "DefaultBilling": {
            "ContactId": "0"
          }
        },
        "DefaultNameServerSettings": {
          "Type": "Dynadot Parking",
          "WithAds": "yes"
        }
      }
    }
  }
}

Get Account Balance Command

Support multi-thread

This command is only available in XML and JSON format:

Get Account Balance Request ParameterExplanation

Get Account Balance Request Parameter
Explanation

N/ANo extra parameter needed

Result XML tagExplanation

Result XML tag
Explanation

<GetAccountBalanceResponse></GetAccountBalanceResponse>Root node of the response XML documentXML document

<GetAccountBalanceHeader></GetAccountBalanceHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetAccountBalanceContent></GetAccountBalanceContent>Response content

<Balance></Balance>Account Balance

Get Account Balance Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_account_balance

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetAccountBalanceResponse>
  <GetAccountBalanceHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetAccountBalanceHeader>
  <GetAccountBalanceContent>
    <BalanceList>
      <Balance>
        <Currency>USD</Currency>
        <Amount>300.00</Amount>
      </Balance>
    </BalanceList>
  </GetAccountBalanceContent>
</GetAccountBalanceResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_account_balance

Response (JSON format)

{
  "GetAccountBalanceResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "BalanceList": [
      {
        "Currency": "USD",
        "Amount": "300.00"
      }
    ]
  }
}

Set Default Whois

Support multi-thread

If calling set default Whois command, the following parameters should be included:

Set Default Whois Request ParameterExplanation

Set Default Whois Request Parameter
Explanation

registrant_contactThe registrant's information of the domain

admin_contactThe administrator's information of the domain

technical_contactThe technical information of the domain

billing_contactThe billing information of the domain

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultWhoisResponse></SetDefaultWhoisResponse>Root node of the response XML document

<SetDefaultWhoisHeader></SetDefaultWhoisHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Whois Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_whois&registrant_contact=0&admin_contact=0&technical_contact=0&billing_contact=0

Response (XML format)

<SetDefaultWhoisResponse>
   <SetDefaultWhoisHeader>
      <SuccessCode>0</SuccessCode>
      <Status>success</Status>
   </SetDefaultWhoisHeader>
</SetDefaultWhoisResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_whois&registrant_contact=0&admin_contact=0&technical_contact=0&billing_contact=0

Response (JSON format)

{
   "SetDefaultWhoisResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default Name Servers Command

Support multi-thread

If calling the set default name servers command, the following parameters should be included:

Set Default Name Servers Request ParameterExplanation

Set Default Name Servers Request Parameter
Explanation

ns0 - ns12The name servers you want to set

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultNsResponse></SetDefaultNsResponse>Tag of set default name servers response, it's the root node of the response XML document

<SetDefaultNsHeader></SetDefaultNsHeader>Tag of set default name servers header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<SetDefaultNsContent></SetDefaultNsContent>Tag of set default name servers content, it's only used when the status is "success"

<Servers></Servers>The information of the servers you have set

<Server></Server>Each server

<ServerName></ServerName>Server name

<ServerId></ServerId>Server Id

Set Default Ns Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_ns&ns0=ns1.hosts.com&ns1=ns2.host.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetDefaultNsResponse>
  <SetDefaultNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultNsHeader>
  <SetDefaultNsContent>
    <Servers>
      <Server>
        <ServerName>ns1.hosts.com</ServerName>
        <ServerId>0</ServerId>
      </Server>
      <Server>
        <ServerName>ns2.hosts.com</ServerName>
        <ServerId>1</ServerId>
      </Server>
    </Servers>
  </SetDefaultNsContent>
</SetDefaultNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_ns&ns0=ns1.hosts.com&ns1=ns2.host.com

Response (JSON format)

{
  "SetDefaultNsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "SetDefaultNsContent": {
      "Servers": [
        {
          "ServerName": "ns1.hosts.com",
          "ServerId": "0"
        },
        {
          "ServerName": "ns2.hosts.com",
          "ServerId": "1"
        }
      ]
    }
  }
}

Set Default Parking Command

Support multi-thread

If calling the set default parking command, the following parameters should be included:

Set Default Parking Request ParameterExplanation

Set Default Parking Request Parameter
Explanation

with_ads (optional)If you don't want a 3rd-party ads, you can use this parameter with "no", default value is "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultParkingResponse></SetDefaultParkingResponse>Root node of the response XML document

<SetDefaultParkingHeader></SetDefaultParkingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Parking Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_parking&folder_id=0&with_ads=no

Response (XML format)

<SetDefaultParkingResponse>
   <SetDefaultParkingHeader>
      <SuccessCode>0</SuccessCode>
      <Status>success</Status>
   </SetDefaultParkingHeader>
</SetDefaultParkingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_parking&folder_id=0&with_ads=no

Response (JSON format)

{
   "SetDefaultParkingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default Forwarding Command

Support multi-thread

If calling the set default forwarding command, the following parameters should be included:

Set Default Forwarding Request ParameterExplanation

Set Default Forwarding Request Parameter
Explanation

forward_urlThe URL you want your domain to forward to. Please note that the parameter must be encoded so that the API call is interpreted properly.

is_temp (optional)Forward status of your domain you want, default value is "temporary", if you want to forward permanently, use this parameter with "no"

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultForwardingResponse></SetDefaultForwardingResponse>Root node of the response XML document

<SetDefaultForwardingHeader></SetDefaultForwardingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Forwarding Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_forwarding&forward_url=http://mydomain.com

Response (XML format)

<SetDefaultForwardingResponse>
  <SetDefaultForwardingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultForwardingHeader>
</SetDefaultForwardingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_forwarding&forward_url=http://mydomain.com

Response (JSON format)

{
   "SetDefaultForwardingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default Stealth Command

Support multi-thread

If calling set default stealth command, the following parameters should be included:

Set Default Stealth Request ParameterExplanation

Set Default Stealth Request Parameter
Explanation

stealth_urlThe URL you want your domain to forward to. Please note that the parameter must be encoded so that the API call is interpreted properly.

stealth_title (optional)The title of the page

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultStealthResponse></SetDefaultStealthResponse>Root node of the response XML document

<SetDefaultStealthHeader></SetDefaultStealthHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Stealth Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_stealth&stealth_title=obama's shop&stealth_url=http://www.obamashop.com

Response (XML format)

<SetDefaultStealthResponse>
  <SetDefaultStealthHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultStealthHeader>
</SetDefaultStealthResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_stealth&stealth_title=obama's shop&stealth_url=http://www.obamashop.com

Response (JSON format)

{
   "SetDefaultStealthResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default Hosting Command

Support multi-thread

If calling the set default hosting command, the following parameters should be included:

Set Default Hosting Request ParameterExplanation

Set Default Hosting Request Parameter
Explanation

hosting_typeType of the default hosting you want, you can select in "advanced" and "basic"

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultHostingResponse></SetDefaultHostingResponse>Root node of the response XML document

<SetDefaultHostingHeader></SetDefaultHostingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Hosting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_hosting&hosting_type=advanced

Response (XML format)

<SetDefaultHostingResponse>
  <SetDefaultHostingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultHostingHeader>
</SetDefaultHostingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_hosting&hosting_type=advanced

Response (JSON format)

{
   "SetDefaultHostingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default DNS Command

Support multi-thread

If calling set default DNS command, the following parameters should be included:

( This command is outdated and not recommended, please use Set Default DNS2 Command instead )

Set Default DNS Request ParameterExplanation

Set Default DNS Request Parameter
Explanation

main_record_typeMain record type

main_recordSpecify a DNS record for your domain

main_txt (optional)Specify a TXT record for your domain. If your main_record_type is aaaa and specified a main_record2, you can set upto 3 main_txts, otherwise, you can set upto 4 main_txts.

main_record2Main record 2, only used when "main_record_type" is "aaaa". Its value must be in ipv4 format.

subdomain0 - subdomain99 (optional)Subdomain records

sub_record_type0 - sub_record_type99 (optional)Subdomain records type

sub_record0 - sub_record99 (optional)IP address or target host

mx_host0 - mx_host2 (optional)Specify the mail host for your domain, distance0 is the highest priority.

mx_distance0 - mx_distance2 (optional)Distance0 is the highest priority

ttl (optional)Time to live

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultDnsResponse></SetDefaultDnsResponse>Root node of the response XML document

<SetDefaultDnsHeader></SetDefaultDnsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default DNS Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_dns&main_record_type=aaaa&main_record=0:0:0:0:0:0:0:1

Response (XML format)

<SetDefaultDnsResponse>
  <SetDefaultDnsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultDnsHeader>
</SetDefaultDnsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_dns&main_record_type=aaaa&main_record=0:0:0:0:0:0:0:1

Response (JSON format)

{
   "SetDefaultDnsResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default DNS2 Command

Support multi-thread

If calling set default DNS command, the following parameters should be included:

Set Default DNS2 Request ParameterExplanation

Set Default DNS2 Request Parameter
Explanation

main_record_type0 - main_record_type19Main record type

main_record0 - main_record19Specify the DNS record for your domain

main_recordx0 - main_recordx19Mx distance, forward type, stealth forward title or email alias, necessary when main_record is "a", "aaaa", "cname", "forward", "txt", "mx", "stealth", "email"

subdomain0 - subdomain99 (optional)Subdomain records

sub_record_type0 - sub_record_type99 (optional)Subdomain records type

sub_record0 - sub_record99 (optional)Subdomain IP address or target host

sub_recordx0 - subdo_recordx99Mx distance, forward type, stealth forward title or email alias, necessary when sub_record_type is "a", "aaaa", "cname", "forward", "txt", "srv", "mx", "stealth", "email"

ttl (optional)Time to live

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultDnsResponse></SetDefaultDnsResponse>Root node of the response XML document

<SetDefaultDnsHeader></SetDefaultDnsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default DNS2 Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_dns2&main_record_type0=aaaa&main_record0=0:0:0:0:0:0:0:1

Response (XML format)

<SetDefaultDnsResponse>
  <SetDefaultDnsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultDnsHeader>
</SetDefaultDnsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_dns2&main_record_type0=aaaa&main_record0=0:0:0:0:0:0:0:1

Response (JSON format)

{
   "SetDefaultDnsResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default Email Forward Command

Support multi-thread

If calling set default email forward command, the following parameters should be included:

Set Default Email Forward Request ParameterExplanation

Set Default Email Forward Request Parameter
Explanation

forward_typeForward type, it can be "donot": Do not forward email, "mx": Deliver email to another mail host (MX record), "forward": Deliver email to another mail host

username0 - username9Username, only used when "forward_type" is "forward"

exist_email0 - exist_email9Existing email address, only used when "forward_type" is "forward"

mx_host0 - mx_host2Mail host, only used when "forward_type" is "mx"

mx_distance0 - mx_distance2Distance0 is the highest priority, only used when "forward_type" is "mx"

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultEmailForwardingResponse></SetDefaultEmailForwardingResponse>Root node of the response XML document

<SetDefaultEmailForwardingHeader></SetDefaultEmailForwardingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Email Forward Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_email_forward&forward_type=forward&username0=test&[email protected]

Response (XML format)

<SetDefaultEmailForwardingResponse>
  <SetDefaultEmailForwardingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultEmailForwardingHeader>
</SetDefaultEmailForwardingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_email_forward&forward_type=forward&username0=test&[email protected]

Response (JSON format)

{
   "SetDefaultEmailForwardingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Clear Default Setting Command

Support multi-thread

If calling the set clear default setting command, the following parameters should be included:

Set Clear Default Setting Request ParameterExplanation

Set Clear Default Setting Request Parameter
Explanation

serviceThe service you want to clear, it can be "forward", "stealth", "email_forwarding", "dns", and "nameservers"

Result XML tagExplanation

Result XML tag
Explanation

<SetClearDefaultSettingResponse></SetClearDefaultSettingResponse>Root node of the response XML document

<SetClearDefaultSettingHeader></SetClearDefaultSettingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Clear Default Setting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_clear_default_setting&service=nameservers

Response (XML format)

<SetClearDefaultSettingResponse>
  <SetClearDefaultSettingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetClearDefaultSettingHeader>
</SetClearDefaultSettingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_clear_default_setting&service=nameservers

Response (JSON format)

{
   "SetClearDefaultSettingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Default Renew Option Command

Support multi-thread

If calling set default renew option command, the following parameters should be included:

Set Default Renew Option Request ParameterExplanation

Set Default Renew Option Request Parameter
Explanation

renew_optionIt can be "donot", "auto", "reset"

Result XML tagExplanation

Result XML tag
Explanation

<SetDefaultRenewOptionResponse></SetDefaultRenewOptionResponse>Root node of the response XML document

<SetDefaultRenewOptionHeader></SetDefaultRenewOptionHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Default Renew Option Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_default_renew_option&renew_option=auto

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetDefaultRenewOptionResponse>
  <SetDefaultRenewOptionHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetDefaultRenewOptionHeader>
</SetDefaultRenewOptionResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_default_renew_option&renew_option=auto

Response (JSON format)

{
  "SetDefaultRenewOptionResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Create Folder Command

Support multi-thread

If calling create folder command, the following parameters should be included:

Create Folder Request ParameterExplanation

Create Folder Request Parameter
Explanation

folder_nameName of the folder you want to create

Result XML tagExplanation

Result XML tag
Explanation

<FolderCreateResponse></FolderCreateResponse>Root node of the response XML document

<FolderCreateHeader></FolderCreateHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<FolderCreateContent></FolderCreateContent>Response content

<FolderName></FolderName>folder name

<FolderId></FolderId>ID of the new folder

Create Folder Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=create_folder&folder_name=new

Response (XML format)

<FolderCreateResponse>
  <FolderCreateHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </FolderCreateHeader>
  <FolderCreateContent>
    <FolderName>new</FolderName>
    <FolderId>1</FolderId>
  </FolderCreateContent>
</FolderCreateResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=create_folder&folder_name=new

Response (JSON format)

{
   "FolderCreateResponse":{
      "ResponseCode":"0",
      "Status":"success",
      "FolderCreateContent":{
         "FolderName":"new",
         "FolderId":"1"
      }
   }
}

Delete Folder Command

Support multi-thread

If calling set Whois command, the following parameters should be included:

Delete Folder Request ParameterExplanation

Delete Folder Request Parameter
Explanation

folder_idThe ID of folders you want to delete, make sure that they separated by commas

Result XML tagExplanation

Result XML tag
Explanation

<DeleteFolderResponse></DeleteFolderResponse>Root node of the response XML document

<DeleteFolderHeader></DeleteFolderHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Delete Folder Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=delete_folder&folder_id=0,1

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<DeleteFolderResponse>
  <DeleteFolderHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </DeleteFolderHeader>
</DeleteFolderResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=delete_folder&folder_id=0,1

Response (JSON format)

{
  "DeleteFolderResponse": {
    "SuccessCode": 0,
    "Status": "success"
  }
}

Set Folder Whois Command

Support multi-thread

If calling set folder Whois command, the following parameters should be included:

Set Folder Whois Request ParameterExplanation

Set Folder Whois Request Parameter
Explanation

folder_idThe folder's ID you want to set

registrant_contactThe registrant's information of the domain

admin_contactThe administrator's information of the domain

technical_contactThe technical information of the domain

billing_contactThe billing information of the domain

enable (optional)If you want to apply this Whois setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize this Whois setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderWhoisResponse></SetFolderWhoisResponse>Root node of the response XML document

<SetFolderWhoisHeader></SetFolderWhoisHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Whois Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_whois&folder_id=0&registrant_contact=0&admin_contact=0&technical_contact=0&billing_contact=0

Response (XML format)

<SetFolderWhoisResponse>
  <SetFolderWhoisHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderWhoisHeader>
</SetFolderWhoisResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_whois&folder_id=0&registrant_contact=0&admin_contact=0&technical_contact=0&billing_contact=0

Response (JSON format)

{
   "SetFolderWhoisResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Name Servers Command

Support multi-thread

If calling the set folder name servers command, the following parameters should be included:

Set Folder Name Servers Request ParameterExplanation

Set Folder Name Servers Request Parameter
Explanation

fold_idThe folder's ID you want to set, only 1 folder can be set per request

ns0 - ns12The name servers to set your domain to use, you can specify up to 13 name servers, but they must already be in your account

enable (optional)If you want to apply this name servers setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize name server setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderNsResponse></SetFolderNsResponse>Tag of set folder name server response, it's the root node of the response XML document

<SetFolderNsHeader></SetFolderNsHeader>Tag of set folder name server response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<SetFolderNsContent></SetFolderNsContent>Tag of set folder name server response content, it's only used when the status is "success"

<Servers></Servers>The information of the servers you have set

<Server></Server>Each server

<ServerName></ServerName>Server name

<ServerId></ServerId>Server ID

Set Folder Ns Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_ns&folder_id=0&ns0=ns1.hosts.com&ns1=ns2.host.com&enable=yes&sync=yes

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetFolderNsResponse>
  <SetFolderNsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderNsHeader>
  <SetFolderNsContent>
    <Servers>
      <Server>
        <ServerName>ns1.hosts.com</ServerName>
        <ServerId>0</ServerId>
      </Server>
      <Server>
        <ServerName>ns2.hosts.com</ServerName>
        <ServerId>1</ServerId>
      </Server>
    </Servers>
  </SetFolderNsContent>
</SetFolderNsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_ns&folder_id=0&ns0=ns1.hosts.com&ns1=ns2.host.com&enable=yes&sync=yes

Response (JSON format)

{
  "SetFolderNsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "SetFolderNsContent": {
      "Servers": [
        {
          "ServerName": "ns1.hosts.com",
          "ServerId": "0"
        },
        {
          "ServerName": "ns2.hosts.com",
          "ServerId": "1"
        }
      ]
    }
  }
}

Set Folder Parking Command

Support multi-thread

If calling the set folder parking command, the following parameters should be included:

Set Folder Parking Request ParameterExplanation

Set Folder Parking Request Parameter
Explanation

folder_idThe folder's ID you want to set, only 1 folder can be set per request

with_ads (optional)If you don't want a 3rd-party ads, you can use this parameter with "no", default value is "yes"

enable (optional)If you want to apply this parking setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize parking setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderParkingResponse></SetFolderParkingResponse>Root node of the response XML document

<SetFolderParkingHeader></SetFolderParkingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Parking Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_parking&folder_id=0&with_ads=no

Response (XML format)

<SetFolderParkingResponse>
  <SetFolderParkingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderParkingHeader>
</SetFolderParkingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_parking&folder_id=0&with_ads=no

Response (JSON format)

{
   "SetFolderParkingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Forwarding Command

Support multi-thread

If calling the set folder forwarding command, the following parameters should be included:

Set Folder Forwarding Request ParameterExplanation

Set Folder Forwarding Request Parameter
Explanation

folder_idThe folder's ID you want to set

forward_urlThe URL you want your domain to forward to. Please note that the parameter must be encoded so that the API call is interpreted properly.

is_temp (optional)Forward status of your domain you want, default value is "temporary", if you want to forward permanently, use this parameter with "no"

enable (optional)If you want to apply this forward setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize forward setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderForwardingResponse></SetFolderForwardingResponse>Root node of the response XML document

<SetFolderForwardingHeader></SetFolderForwardingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Forwarding Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_forwarding&folder_id=0&forward_url=http://mydomain.com&sync=yes

Response (XML format)

<SetFolderForwardingResponse>
  <SetFolderForwardingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderForwardingHeader>
</SetFolderForwardingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_forwarding&folder_id=0&forward_url=http://mydomain.com&sync=yes

Response (JSON format)

{
   "SetFolderForwardingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Stealth Command

Support multi-thread

If calling set folder stealth command, the following parameters should be included:

Set Folder Stealth Request ParameterExplanation

Set Folder Stealth Request Parameter
Explanation

folder_idThe folder's ID that you want to set

stealth_urlThe URL you want your domain to forward to. Please note that the parameter must be encoded so that the API call is interpreted properly.

stealth_title (optional)The title of the page

enable (optional)If you want to apply this stealth setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize stealth setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderStealthResponse></SetFolderStealthResponse>Root node of the response XML document

<SetFolderStealthHeader></SetFolderStealthHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Stealth Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_stealth&folder_id=0&stealth_title=obama's shop&stealth_url=http://www.obamashop.com&sync=yes

Response (XML format)

<SetFolderStealthResponse>
  <SetFolderStealthHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderStealthHeader>
</SetFolderStealthResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_stealth&folder_id=0&stealth_title=obama's shop&stealth_url=http://www.obamashop.com&sync=yes

Response (JSON format)

{
   "SetFolderStealthResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Hosting Command

Support multi-thread

If calling the set folder hosting command, the following parameters should be included:

Set Folder Hosting Request ParameterExplanation

Set Folder Hosting Request Parameter
Explanation

folder_idThe folder's ID you want to set

hosting_typeType of the hosting you want, you can select in "advanced" and "basic"

enable (optional)If you want to apply this hosting setting to future domains that you move to this folder, you can use this parameter with "yes"

even (optional)If you want to synchronize hosting setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderHostingResponse></SetFolderHostingResponse>Root node of the response XML document

<SetFolderHostingHeader></SetFolderHostingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Hosting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_hosting&folder_id=0&hosting_type=advanced&sync=yes

Response (XML format)

<SetFolderHostingResponse>
  <SetFolderHostingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderHostingHeader>
</SetFolderHostingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_hosting&folder_id=0&hosting_type=advanced&sync=yes

Response (JSON format)

{
   "SetFolderHostingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder DNS Command

Support multi-thread

If calling set folder DNS command, the following parameters should be included:

( This command is outdated and not recommended, please use Set Folder DNS2 Command instead )

Set Folder DNS Request ParameterExplanation

Set Folder DNS Request Parameter
Explanation

folder_idThe ID of the folder which you want to set

main_record_typeMain record type

main_recordSpecify a DNS record for your domain

with_ads (optional)Specify a TXT record for your domain. If your main_record_type is aaaa and specified a main_record2, you can set upto 3 main_txts, otherwise, you can set upto 4 main_txts.

main_record2Main record 2, only used when "main_record_type" is "aaaa". Its value must be in ipv4 format.

subdomain0 - subdomain99 (optional)Subdomain records (optional)

sub_record_type0 - sub_record_type99 (optional)Subdomain records type

sub_record0 - sub_record99 (optional)IP address or target host

mx_host0 - mx_host2 (optional)Specify the mail host for your domain, distance0 is the highest priority.

mx_distance0 - mx_distance2 (optional)Distance0 is highest priority

ttl (optional)Time to live

enable (optional)If you want to apply this DNS setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize this DNS server setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderDnsResponse></SetFolderDnsResponse>Root node of the response XML document

<SetFolderDnsHeader></SetFolderDnsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder DNS Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_dns&folder_id=0&main_record_type=aaaa&main_record=0:0:0:0:0:0:0:1

Response (XML format)

<SetFolderDnsResponse>
  <SetFolderDnsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderDnsHeader>
</SetFolderDnsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_dns&folder_id=0&main_record_type=aaaa&main_record=0:0:0:0:0:0:0:1

Response (JSON format)

{
   "SetFolderDnsResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder DNS2 Command

Support multi-thread

If calling set folder DNS2 command, the following parameters should be included:

Set Folder DNS2 Request ParameterExplanation

Set Folder DNS2 Request Parameter
Explanation

folder_idThe ID of the folder which you want to set

main_record_type0 - main_record_type19Main record type, should be "a", "aaaa", "cname", "forward", "txt", "mx", "stealth", "email"

main_record0 - main_record19Specify the DNS record for your domain

main_recordx0 - main_recordx19Mx distance, forward type, stealth forward title or email alias, necessary when main_record_type is "forward","mx","stealth","email"

subdomain0 - subdomain99 (optional)Subdomain records (optional)

sub_record_type0 - sub_record_type99 (optional)Subdomain records type, should be "a", "aaaa", "cname", "forward", "txt", "srv", "mx", "stealth", "email"

sub_record0 - sub_record99 (optional)IP address or target host

sub_recordx0 - sub_recordx99 (optional)Mx distance, forward type, stealth forward title or email alias, necessary when sub_record_type is "forward","mx","stealth","email"

ttl (optional)Time to live

enable (optional)If you want to apply this DNS setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize this DNS server setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderDnsResponse></SetFolderDnsResponse>Root node of the response XML document

<SetFolderDnsHeader></SetFolderDnsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Dns2 Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_dns2&folder_id=0&main_record_type0=aaaa&main_record0=0:0:0:0:0:0:0:1

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetFolderDnsResponse>
  <SetFolderDnsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderDnsHeader>
</SetFolderDnsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_dns2&folder_id=0&main_record_type0=aaaa&main_record0=0:0:0:0:0:0:0:1

Response (JSON format)

{
  "SetFolderDnsResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Set Folder Email Forward Command

Support multi-thread

If calling set folder email forward command, the following parameters should be included:

Set Folder Email Forward Request ParameterExplanation

Set Folder Email Forward Request Parameter
Explanation

domainThe domain name you want to set, 100 domains can be set per request, make sure they are separated by commas

folder_idID of the folder you want to set

forward_typeForward type, it can be "donot": Do not forward email, "mx": Deliver email to another mail host (MX record), "forward": Deliver email to another mail host

username0 - username9Username, only used when "forward_type" is "forward"

exist_email0 - exist_email9Existing email address, only used when "forward_type" is "forward"

mx_host0 - mx_host2Mail host, only used when "forward_type" is "mx"

mx_distance0 - mx_distance2Distance0 is the highest priority, only used when "forward_type" is "mx"

enable (optional)If you want to apply this setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize this setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderEmailForwardingResponse></SetFolderEmailForwardingResponse>Root node of the response XML document

<SetFolderEmailForwardingHeader></SetFolderEmailForwardingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Email Forward Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_email_forward&folder_id=0&forward_type=forward&username0=test&[email protected]

Response (XML format)

<SetFolderEmailForwardingResponse>
  <SetFolderEmailForwardingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderEmailForwardingHeader>
</SetFolderEmailForwardingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_email_forward&folder_id=0&forward_type=forward&username0=test&[email protected]

Response (JSON format)

{
   "SetFolderEmailForwardingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Clear Folder Setting Command

Support multi-thread

If calling the set clear folder setting command, the following parameters should be included:

Set Clear Folder Setting Request ParameterExplanation

Set Clear Folder Setting Request Parameter
Explanation

folder_idThe folder's ID you want to set

serviceThe service you want to clear, it can be "forward", "stealth", "email_forwarding", "dns", and "nameservers"

Result XML tagExplanation

Result XML tag
Explanation

<SetClearFolderSettingResponse></SetClearFolderSettingResponse>Root node of the response XML document

<SetClearFolderSettingHeader></SetClearFolderSettingHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Clear Folder Setting Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_clear_folder_setting&folder_id=0&service=nameservers

Response (XML format)

<SetClearFolderSettingResponse>
  <SetClearFolderSettingHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetClearFolderSettingHeader>
</SetClearFolderSettingResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_clear_folder_setting&folder_id=0&service=nameservers

Response (JSON format)

{
   "SetClearFolderSettingResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Name Command

Support multi-thread

If calling set folder name command, the following parameters should be included:

Set Folder Name Request ParameterExplanation

Set Folder Name Request Parameter
Explanation

folder_idID of the folder that you want to set

folder_nameNew folder name

Result XML tagExplanation

Result XML tag
Explanation

<SetFolderNameResponse></SetFolderNameResponse>Root node of the response XML document

<SetFolderNameHeader></SetFolderNameHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Folder Name Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_name&folder_id=0&folder_name=new

Response (XML format)

<SetFolderNameResponse>
  <SetFolderNameHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderNameHeader>
</SetFolderNameResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_name&folder_id=0&folder_name=new

Response (JSON format)

{
   "SetFolderNameResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Set Folder Renew Option Command

Support multi-thread

If calling the set folder renew option command, the following parameters should be included:

Set Folder Renew Option Request ParameterExplanation

Set Folder Renew Option Request Parameter
Explanation

folder_idThe folder's ID you want to set, only 1 folder can be set per request

renew_optionThe renew option you want to set to the folder; it can be "donot", "auto" or "reset"

enable (optional)If you want to apply this renew setting to future domains that you move to this folder, you can use this parameter with "yes"

sync (optional)If you want to synchronize renew setting of all domains in this folder, you can use this parameter with "yes"

Result XML tagExplanation

Result XML tag
Explanation

<Response></Response>Root node of the response XML document

<ResponseHeader></ResponseHeader>ResponseHeader

<ResponseCode></ResponseCode>Response code, "0" for success, "-1" for failed

<Error></Error>Error information, it is only used when response code is "-1"

Set Folder Renew Option Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_folder_renew_option&folder_id=0&renew_option=auto

Response (XML format)

<SetFolderRenewOptionResponse>
  <SetFolderRenewOptionHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetFolderRenewOptionHeader>
</SetFolderRenewOptionResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_folder_renew_option&folder_id=0&renew_option=auto

Response (JSON format)

{
   "SetFolderRenewOptionResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Folder List Command

Support multi-thread

This command is only available in XML and JSON format:

Folder List Request ParameterExplanation

Folder List Request Parameter
Explanation

N/ANo extra parameter needed

<FolderListResponse></FolderListResponse>Root node of the response XML document

<FolderListHeader></FolderListHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<FolderListContent></FolderListContent>Response content

<FolderList></FolderList>Folder list

<FolderId></FolderId>Folder ID

<FolderName></FolderName>Folder name

<DefaultWhois></DefaultWhois>Default Whois

<DefaultWhoisEnableStatus></DefaultWhoisEnableStatus>Default Whois enable status

<DefaultRegistrant></DefaultRegistrant>Default registrant

<ContactId></ContactId>Contact's ID

<DefaultAdmin></DefaultAdmin>Default admin

<DefaultTechnical></DefaultTechnical>Default technical info

<DefaultBilling></DefaultBilling>Default billing info

<DefaultNameServerEnableStatus></DefaultNameServerEnableStatus>Default name server enable status

<NameServerSettings></NameServerSettings>Name server settings

<Type></Type>Name server type

<WithAds></WithAds>With ads or not

<DefaultRenewOption></DefaultRenewOption>Default renew option

<DefaultRenewOptionEnableStatus></DefaultRenewOptionEnableStatus>Default renew option enable status

<RenewOption></RenewOption>Renew option

<DefaultTransferLock></DefaultTransferLock>Default transfer lock

<DefaultTransferLockEnableStatus></DefaultTransferLockEnableStatus>Default transfer lock enable status

<LockStatus></LockStatus>Lock status

Folder List Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=folder_list

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<FolderListResponse>
  <FolderListHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </FolderListHeader>
  <FolderListContent>
    <FolderList>
      <List>
        <Folder>
          <FolderId>0</FolderId>
          <FolderName>new</FolderName>
          <DefaultWhois>
            <DefaultWhoisEnableStatus>disable</DefaultWhoisEnableStatus>
            <DefaultRegistrant>
              <ContactId>0</ContactId>
            </DefaultRegistrant>
            <DefaultAdmin>
              <ContactId>0</ContactId>
            </DefaultAdmin>
            <DefaultTechnical>
              <ContactId>0</ContactId>
            </DefaultTechnical>
            <DefaultBilling>
              <ContactId>0</ContactId>
            </DefaultBilling>
          </DefaultWhois>
          <DefaultNameServers>
            <DefaultNameServerEnableStatus>disable</DefaultNameServerEnableStatus>
            <NameServerSettings>
              <Type>Dynadot Parking</Type>
              <WithAds>Yes</WithAds>
            </NameServerSettings>
          </DefaultNameServers>
          <DefaultRenewOption>
            <DefaultRenewOptionEnableStatus>disable</DefaultRenewOptionEnableStatus>
            <RenewOption>no renew option</RenewOption>
          </DefaultRenewOption>
          <DefaultTransferLock>
            <DefaultTransferLockEnableStatus>disable</DefaultTransferLockEnableStatus>
            <LockStatus>locked</LockStatus>
          </DefaultTransferLock>
        </Folder>
      </List>
    </FolderList>
  </FolderListContent>
</FolderListResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=folder_list

Response (JSON format)

{
  "FolderListResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "FolderList": [
      {
        "FolderId": "0",
        "FolderName": "new",
        "DefaultWhois": {
          "DefaultWhoisEnableStatus": "disable",
          "DefaultRegistrant": {
            "ContactId": "0"
          },
          "DefaultAdmin": {
            "ContactId": "0"
          },
          "DefaultTechnical": {
            "ContactId": "0"
          },
          "DefaultBilling": {
            "ContactId": "0"
          }
        },
        "DefaultNameServers": {
          "DefaultTransferLockEnableStatus": "disable",
          "NameServerSettings": {
            "Type": "Dynadot Parking",
            "WithAds": "Yes"
          }
        },
        "DefaultRenewOption": {
          "DefaultRenewOptionEnableStatus": "disable",
          "RenewOption": "no renew option"
        },
        "DefaultTransferLock": {
          "DefaultTransferLockEnableStatus": "disable",
          "LockStatus": "locked"
        }
      }
    ]
  }
}

Add Backorder Request Command

Support multi-thread

If calling add backorder request command, the following parameters should be included:

Add Backorder Request Request ParameterExplanation

Add Backorder Request Request Parameter
Explanation

domainThe domain(s) you want to add and agree to pay for if Dynadot catches it, 100 domains can be added per request, they should be separated by commas

Result XML tagExplanation

Result XML tag
Explanation

<AddBackorderRequestResponse></AddBackorderRequestResponse>Root node of the response XML document

<AddBackorderRequestHeader></AddBackorderRequestHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Add Backorder Request Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=add_backorder_request&domain=droppingdomain.com,domaindropping.net,domaindrop.org

Response (XML format)

<AddBackorderRequestResponse>
  <AddBackorderRequestHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </AddBackorderRequestHeader>
</AddBackorderRequestResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=add_backorder_request&domain=droppingdomain.com,domaindropping.net,domaindrop.org

Response (JSON format)

{
   "AddBackorderRequestResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Delete Backorder Request Command

Support multi-thread

If calling delete backorder request command, the following parameters should be included:

Delete Backorder Request Request ParameterExplanation

Delete Backorder Request Request Parameter
Explanation

domainThe domain(s) you want to remove from your backorder request list, 100 domains can be removed per request, they should be separated by commas

Result XML tagExplanation

Result XML tag
Explanation

<DeleteBackorderRequestResponse></DeleteBackorderRequestResponse>Root node of the response XML document

<DeleteBackorderRequestHeader></DeleteBackorderRequestHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Delete Backorder Request Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=delete_backorder_request&domain=domaindropp.com

Response (XML format)

<DeleteBackorderRequestResponse>
  <DeleteBackorderRequestHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </DeleteBackorderRequestHeader>
</DeleteBackorderRequestResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=delete_backorder_request&domain=domaindropp.com

Response (JSON format)

{
   "DeleteBackorderRequestResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Backorder Request List Command

Support multi-thread

Calling the backorder request list command will return a list of backorder request list of specified account. If calling this command, the following parameters should be included:

Backorder Request List Request ParameterExplanation

Backorder Request List Request Parameter
Explanation

start_dateStart drop date of auction you want to request, yyyy-mm-dd, like 2015-05-05

end_dateEnd drop date of auction you want to request, yyyy-mm-dd, like 2015-05-05

Result XML tagExplanation

Result XML tag
Explanation

<BackorderRequestListResponse></BackorderRequestListResponse>Root node of the response XML document

<BackorderRequestListHeader></BackorderRequestListHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<BackorderRequestListContent></BackorderRequestListContent>Response content

<BackorderRequestList></BackorderRequestList>Backorder Request List

<BackorderRequest></BackorderRequest>Backorder Request

<Domain></Domain>Domain on your list

<CutoffTime></CutoffTime>Cutoff date to delete a request in Unix time (milliseconds since midnight UTC of January 1, 1970)

<BackorderRequestStatus></BackorderRequestStatus>Status in the drop catching process

Backorder Request List Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=backorder_request_list&startDate=2015-01-01&endDate=2015-5-20

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<BackorderRequestListResponse>
  <BackorderRequestListHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </BackorderRequestListHeader>
  <BackorderRequestListContent>
    <BackorderRequestList>
      <BackorderRequest>
        <DomainName>testdrop.com</DomainName>
        <CutoffTime>1403914140000</CutoffTime>
        <BackorderRequestStatus>Active</BackorderRequestStatus>
      </BackorderRequest>
      <BackorderRequest>
        <DomainName>testdrop3.com</DomainName>
        <CutoffTime>1403914140000</CutoffTime>
        <BackorderRequestStatus>Active</BackorderRequestStatus>
      </BackorderRequest>
      <BackorderRequest>
        <DomainName>testdrop4.com</DomainName>
        <CutoffTime>1403914140000</CutoffTime>
        <BackorderRequestStatus>Active</BackorderRequestStatus>
      </BackorderRequest>
      <BackorderRequest>
        <DomainName>testdrop5.com</DomainName>
        <CutoffTime>1403914140000</CutoffTime>
        <BackorderRequestStatus>Active</BackorderRequestStatus>
      </BackorderRequest>
    </BackorderRequestList>
  </BackorderRequestListContent>
</BackorderRequestListResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=backorder_request_list&startDate=2015-01-01&endDate=2015-5-20

Response (JSON format)

{
  "BackorderRequestListResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "BackorderRequestList": [
      {
        "DomainName": "testdrop.com",
        "CutoffTime": "1403914140000",
        "BackorderRequestStatus": "Active"
      },
      {
        "DomainName": "testdrop3.com",
        "CutoffTime": "1403914140000",
        "BackorderRequestStatus": "Active"
      },
      {
        "DomainName": "testdrop4.com",
        "CutoffTime": "1403914140000",
        "BackorderRequestStatus": "Active"
      },
      {
        "DomainName": "testdrop5.com",
        "CutoffTime": "1403914140000",
        "BackorderRequestStatus": "Active"
      }
    ]
  }
}

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=backorder_request_list&startDate=2015-01-01&endDate=2015-5-20

Response (CSV format)

ok,success,Domain,CutoffTime,BackorderRequestStatus,testdrop.com,1403914140000,Active,testdrop3.com,1403914140000,Active,testdrop4.com,1403914140000,Active,testdrop5.com,1403914140000,Active

Get Open Auctions Command

Support multi-thread

Calling the get open auctions command will return a list of auctions which are in progress. If calling this command, the following parameters should be included:

Get Open Auctions Request ParameterExplanation

Get Open Auctions Request Parameter
Explanation

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

typeThe auction type you want to see, it should be "expired", "user", "backorder", or "registry_expired", "registrar", if you want to get more than one auction types, you can use "," to split each auction type

Result XML tagExplanation

Result XML tag
Explanation

<GetOpenAuctionsResponse></GetOpenAuctionsResponse>Tag of get open auctions response, it's the root node of the response XML document

<GetOpenAuctionsHeader></GetOpenAuctionsHeader>Get open auctions header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetOpenAuctionsContent></GetOpenAuctionsContent>Tag of get open auctions content, it's only used when status is "success"

<Auction></Auction>Tag of auction item, it's only used when status is "success"

<AuctionId></AuctionId>ID of auction

<Domain></Domain>Domain name of auction

<BidPrice></BidPrice>Current bid price of auction

<BidPriceCurrency></BidPriceCurrency>Currency of bid price

<Bids></Bids>Count of auction bids

<EndTime></EndTime>End time of auction

<EndTimestamp></EndTimestamp>End date of auction in Unix time (milliseconds since midnight UTC of January 1, 1970)

<Revenue></Revenue>Revenue of auction

<RevenueCurrency></RevenueCurrency>Currency of revenue

<Visitors></Visitors>Visitors of domain

<Links></Links>Inbound links of domain

<Age></Age>Age of domain

Get Open Auctions Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_open_auctions&currency=usd&type=expired

Response (XML format)

<GetOpenAuctionsResponse>
  <GetOpenAuctionsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetOpenAuctionsHeader>
  <GetOpenAuctionsContent>
    <Auction>
           <AuctionId>0</AuctionId>
            <Domain>domain.com</Domain>
            <BidPrice>63.99</BidPrice>
            <BidPriceCurrency>USD</BidPriceCurrency>
            <Bids>0</Bids>
            <EndTime>2015/04/28 05:46 UTC</EndTime>
            <EndTimestamp>1430199960354</EndTimestamp>
            <Revenue>72</Revenue>
            <RevenueCurrency>USD</RevenueCurrency>
            <Visitors>-1</Visitors>
            <Links>-1</Links>
            <Age>1</Age>
    </Auction>
    <Auction>
           <AuctionId>0</AuctionId>
            <Domain>domain.com</Domain>
            <BidPrice>63.99</BidPrice>
            <BidPriceCurrency>USD</BidPriceCurrency>
            <Bids>0</Bids>
            <EndTime>2015/04/28 05:46 UTC</EndTime>
            <EndTimestamp>1430199960354</EndTimestamp>
            <Revenue>72</Revenue>
            <RevenueCurrency>USD</RevenueCurrency>
            <Visitors>-1</Visitors>
            <Links>-1</Links>
            <Age>1</Age>
    </Auction>
    .
    .
    .
  </GetOpenAuctionsContent>
</GetOpenAuctionsResponse>

Request(csv format)

https://api.dynadot.com/api3.html?key=mykey&command=get_open_auctions¤cy=usd&type=expired

Response

ok,
success,
AuctionId,Domain,BidPrice,BidPriceCurrency,Bids,EndTime,EndTimestamp,Revenue,RevenueCurrency,Visitors,Links,Age
10001,domain.com,92.99,USD,0,2015/04/28 18:04 UTC,1430244248274,0.64,USD,-1,-1,1
10002,xn--wkccg.com,77.99,USD,0,2015/05/01 06:04 UTC,1430460248338,86,USD,435,-1,1
10003,domain2.com,11.25,USD,0,2015/05/05 06:04 UTC,1430805846946,91,USD,358,-1,1
.
.
.

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_open_auctions&currency=usd&type=expired

Response (JSON format)

{
    "status": "success",
    "auction_list": [
        {
            "auction_id": 11,
            "domain": "domain.com",
            "utf_name": "domain.com",
            "is_idn": false,
            "auction_type": "expired",
            "currency": "USD",
            "current_bid_price": "124.00",
            "bids": 4,
            "bidders": 2,
            "time_left": "1 day, 23 hours",
            "start_time": "2022/03/28 02:20 PST",
            "start_time_stamp": 1648459234033,
            "end_time": "2022/04/04 02:20 PST",
            "end_time_stamp": 1649064034033,
            "visitors": 223,
            "links": "-",
            "age": 0,
            "dyna_appraisal": "-"
        },
        {
            "auction_id": 12,
            "domain": "domain0.com",
            "utf_name": "domain0.com",
            "is_idn": false,
            "auction_type": "expired",
            "currency": "USD",
            "current_bid_price": "44.99",
            "bids": 1,
            "bidders": 1,
            "time_left": "2 days, 23 hours",
            "start_time": "2022/03/29 02:20 PST",
            "start_time_stamp": 1648545634049,
            "end_time": "2022/04/05 02:20 PST",
            "end_time_stamp": 1649150434049,
            "visitors": 245,
            "links": "-",
            "age": 0,
            "dyna_appraisal": "-"
        }
        ...
    ]
}

Get Auction Details Command

Support multi-thread

Calling the get auction details command will return the details of auction specified. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Get Auction Details Request ParameterExplanation

Get Auction Details Request Parameter
Explanation

domainThe domain name of auction, IDN(International Domain Name) should use punycode, such as "xn--wkccg.com". you can get more than one auctions , each domain must be split by ","

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetAuctionDetailsResponse></GetAuctionDetailsResponse>Tag of get auction details response, it's the root node of the response XML document

<GetAuctionDetailsHeader></GetAuctionDetailsHeader>Get backorder auction details header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetAuctionDetailsContent></GetAuctionDetailsContent>Tag of get auction details content, it's only used when status is "success"

<AuctionStatusId></AuctionStatusId>Status id of auction : '0' for In Progress, '1' for Cancelled by User, '2' for Cancelled by Admin, '3' for Cancelled by Renewal, '4' for Complete, '5' for Cancelled by Transfer Away

<AuctionStatus></AuctionStatus>Status of auction

<UserIsHighBid></UserIsHighBid>If user is the highest bid

<YourCurrentBid></YourCurrentBid>Your current bid price for specified auction. If you haven't placed a bid, it will be '-1'

<YourProxyBid></YourProxyBid>Your proxy bid for specified auction. If you haven't placed a bid, it will be '-1'

<AuctionId></AuctionId>ID of auction

<Domain></Domain>Domain name of auction

<BidPrice></BidPrice>Current bid price of auction

<BidPriceCurrency></BidPriceCurrency>Currency of bid price

<Bids></Bids>Count of auction bids

<EndTime></EndTime>End time of auction

<EndTimestamp></EndTimestamp>End date of auction in Unix time (milliseconds since midnight UTC of January 1, 1970)

<IsPremium></IsPremium>Whether it is a premium domain

<RenewalPrice></RenewalPrice>Renewal price

Get Auction Details Example

Request (XML format)https://api.dynadot.com/api3.xml?key=MY_API_KEY&command=get_auction_details&domain=domain0.com&currency=usd

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetAuctionDetailsResponse>
  <GetAuctionDetailsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetAuctionDetailsHeader>
  <GetAuctionDetailsContent>
    <Auction>
      <AuctionStatusId>0</AuctionStatusId>
      <AuctionStatus>1</AuctionStatus>
      <AuctionId>0</AuctionId>
      <Domain>test.biz</Domain>
      <BidPrice>46.99</BidPrice>
      <BidPriceCurrency>USD</BidPriceCurrency>
      <Bids>0</Bids>
      <EndTime>1970/01/01 00:00 UTC</EndTime>
      <EndTimestamp>0</EndTimestamp>
      <Revenue>1</Revenue>
      <RevenueCurrency>USD</RevenueCurrency>
      <Visitors>-1</Visitors>
      <Links>1</Links>
      <Age>10</Age>
      <isPremium>false</isPremium>
      <RenewalPrice>-0.1</RenewalPrice>
      <UserIsHighBid>false</UserIsHighBid>
      <YourCurrentBid>-1</YourCurrentBid>
      <YourProxyBid>-1</YourProxyBid>
    </Auction>
  </GetAuctionDetailsContent>
</GetAuctionDetailsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=MY_API_KEY&command=get_auction_details&domain=domain0.com&currency=usd

Response (JSON format)

{
  "status": "success",
  "size": 1,
  "auction_details": [
    {
      "auction_json": {
        "auction_id": 0,
        "domain": "test.biz",
        "utf_name": "test.biz",
        "is_idn": false,
        "auction_type": "expired",
        "current_bid_price": "46.99",
        "accepted_bid_price": "46.99",
        "currency": "USD",
        "is_high_bidder": false,
        "bids": 0,
        "bidders": 0,
        "auction_status_id": 0,
        "time_left": "1",
        "start_time": "1",
        "start_time_stamp": 0,
        "end_time": "",
        "end_time_stamp": 0,
        "revenue": "1",
        "visitors": -1,
        "links": "1",
        "age": 10,
        "estibot_appraisal": "",
        "bidder_name": "",
        "bid_price": "",
        "timestamp": 0,
        "bid_status": "",
        "is_proxy_auto_bid": false,
        "auction_ended": false,
        "customer_bided": false,
        "customer_bid": "1",
        "customer_proxy_bid": "1",
        "is_premium": false,
        "renewal_price": "-0.1"
      },
      "bid_history": []
    }
  ]
}

Get Auction Bids Command

Support multi-thread

Calling the get auction bids command will get your bids list which you took part in. If calling this command, the following parameters should be included:

Get Auction Bids Request ParameterExplanation

Get Auction Bids Request Parameter
Explanation

currency (optional)The currency of your bid, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetAuctionBidsResponse></GetAuctionBidsResponse>Tag of get auction bids response, it's the root node of the response XML document

<GetAuctionBidsHeader></GetAuctionBidsHeader>Get auction bids header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetAuctionBidsContent></GetAuctionBidsContent>Tag of get auction bids content, it's only used when status is "success"

<BidList></BidList> Bid List

<Bid></Bid> Bid Item

<BidId></BidId> ID of bid

<AuctionId></AuctionId> ID of auction

<AccountId></AccountId>ID of account

<Domain></Domain>Domain name of auction

<DomainUtf></DomainUtf>Domain utf name of auction

<AuctionType></AuctionType>Type of auction

<IsIdn></IsIdn>If this domain is Internationalized Domain Name

<CurrentBid></CurrentBid>Current bid price for the auction

<YourStatus></YourStatus>Your bid status for the auction

<ProxyBid></ProxyBid>Your proxy bid price for the auction

<ActiveBidders></ActiveBidders>The amount of bidders who take part in this auction

<TimeLeft></TimeLeft>the left time for the auction

<EndTime></EndTime>The end time for the auction

<EndTimestamp></EndTimestamp>The end time stamp for the auction

Get Auction Bids Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_auction_bids&ampcurrency=usd

Response (XML format)

<GetAuctionBidsResponse>
    <GetAuctionBidsHeader>
        <SuccessCode>0</SuccessCode>
        <Status>success</Status>
    </GetAuctionBidsHeader>
    <GetAuctionBidsContent>
        <BidList>
            <Bid>
                <BidId>0</BidId>
                <AuctionId>11</AuctionId>
                <AccountId>1</AccountId>
                <Domain>domain.com</Domain>
                <DomainUtf>domain.com</DomainUtf>
                <AuctionType>expired</AuctionType>
                <IsIdn>false</IsIdn>
                <CurrentBid>$124.00</CurrentBid>
                <YourStatus>Out Bid</YourStatus>
                <ProxyBid>$119.00</ProxyBid>
                <ActiveBidders>2</ActiveBidders>
                <TimeLeft>1 day, 6 hours</TimeLeft>
                <EndTime>2022/04/04 02:20:34 PST</EndTime>
                <EndTimestamp>1649064034033</EndTimestamp>
            </Bid>
            <Bid>
                <BidId>9</BidId>
                <AuctionId>12</AuctionId>
                <AccountId>1</AccountId>
                <Domain>domain0.com</Domain>
                <DomainUtf>domain0.com</DomainUtf>
                <AuctionType>expired</AuctionType>
                <IsIdn>false</IsIdn>
                <CurrentBid>$44.99</CurrentBid>
                <YourStatus>High Bidder</YourStatus>
                <ProxyBid>$121.00</ProxyBid>
                <ActiveBidders>1</ActiveBidders>
                <TimeLeft>2 days, 6 hours</TimeLeft>
                <EndTime>2022/04/05 02:20:34 PST</EndTime>
                <EndTimestamp>1649150434049</EndTimestamp>
            </Bid>
        </BidList>
    </GetAuctionBidsContent>
</GetAuctionBidsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_auction_bids&ampcurrency=usd

Response (JSON format)

{
    "status": "success",
    "auction_bids": [
        {
            "bid_id": 0,
            "auction_id": 11,
            "account_id": "1",
            "domain": "domain.com",
            "domain_utf": "domain.com",
            "auction_type": "expired",
            "is_idn": false,
            "current_bid": "$44.99",
            "your_status": "High Bidder",
            "proxy_bid": "$119.00",
            "active_bidders": 1,
            "time_left": "1 day, 23 hours",
            "end_time": "2022/04/04 02:20:34 PST",
            "end_time_stamp": 1649064034033
        },
        {
            "bid_id": 2,
            "auction_id": 12,
            "account_id": "1",
            "domain": "domain0.com",
            "domain_utf": "domain0.com",
            "auction_type": "expired",
            "is_idn": false,
            "current_bid": "$44.99",
            "your_status": "High Bidder",
            "proxy_bid": "$119.00",
            "active_bidders": 1,
            "time_left": "2 days, 23 hours",
            "end_time": "2022/04/05 02:20:34 PST",
            "end_time_stamp": 1649150434049
        }
        ...
    ]
}

Place Auction Bid Command

Support multi-thread

Calling the place auction bid command will place a bid for specified auction. If calling this command, the following parameters should be included:

Place Auction Bid Request ParameterExplanation

Place Auction Bid Request Parameter
Explanation

domainThe domain name of auction, IDN (Internationalized Domain Name) should use punycode, such as "xn--wkccg.com"

bid_amountYour bid amount for auction, default currency is US Dollars, you can also specify it by currency parameter below

currency (optional)The currency of your bid, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<PlaceAuctionBidResponse></PlaceAuctionBidResponse>Tag of place auction bid response, it's the root node of the response XML document

<PlaceAuctionBidHeader></PlaceAuctionBidHeader>Place auction bid header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Domain Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=place_auction_bid&domain=example.com&bid_amount=99.9&currency=usd

Response (XML format)

<PlaceAuctionBidResponse>
  <PlaceAuctionBidHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </PlaceAuctionBidHeader>
</PlaceAuctionBidResponse>

Request(csv format)

https://api.dynadot.com/api3.html?key=mykey&command=place_auction_bid&domain=example.com&bid_amount=99.9¤cy=usd

Response

ok,success

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=place_auction_bid&domain=example.com&bid_amount=99.9&currency=usd

Response (JSON format)

{
    "status": "success",
    "auction_details": {
        "auction_json": {
            "auction_id": 12,
            "domain": "example.com",
            "utf_name": "example.com",
            "is_idn": false,
            "auction_type": "expired",
            "current_bid_price": "44.99",
            "accepted_bid_price": "45.99",
            "currency": "USD",
            "is_high_bidder": true,
            "bids": 3,
            "bidders": 2,
            "time_left": "2 days, 22 hours",
            "start_time": "2022/03/29 02:20 PST",
            "start_time_stamp": 1648545634049,
            "end_time": "2022/04/05 02:20 PST",
            "end_time_stamp": 1649150434049,
            "revenue": "$26.50",
            "visitors": 245,
            "links": "-",
            "age": 0,
            "dyna_appraisal": "-",
            "auction_ended": false,
            "customer_bided": true,
            "customer_bid": "44.99",
            "customer_proxy_bid": "$121.00"
        },
        "bid_history": [
            {
                "bidder_name": "You",
                "bid_price": "44.99",
                "currency": "USD",
                "timestamp": 1648892255084,
                "bid_status": "High Bidder",
                "is_proxy_auto_bid": false
            }
            ...        ]
    }
}

Get Closed Auctions Command

Support multi-thread

Calling the get closed auctions command will return a list of closed auctions of specified account. If calling this command, the following parameters should be included:

Get Closed Auctions Request ParameterExplanation

Get Closed Auctions Request Parameter
Explanation

start_dateStart date of auction, yyyy-mm-dd, like 2015-05-05

end_dateEnd date of auction, yyyy-mm-dd, like 2015-05-05

currency (optional)The currency of your bid, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetClosedAuctionsResponse></GetClosedAuctionsResponse>Tag of get closed auctions response, it's the root node of the response XML document

<GetClosedAuctionsHeader></GetClosedAuctionsHeader>Get closed auctions header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetClosedAuctionsContent></GetClosedAuctionsContent>Tag of get closed auctions content, it's only used when status is "success"

<Auction></Auction>Tag of auction item, it's only used when status is "success"

<AuctionId></AuctionId>ID of auction

<Domain></Domain>Domain name of auction

<AuctionStatusId></AuctionStatusId>Status id of auction, '0' for In Progress and '1' for Closed by User, '2' for Closed by Admin, '3' for Closed by Renewal, '4' for Closed by Timeout, '5' for Closed by Transfer Away

<AuctionStatus></AuctionStatus>Status of auction

<BidPrice></BidPrice>Current bid price of auction

<BidPriceCurrency></BidPriceCurrency>Currency of bid price

<Bids></Bids>Count of auction bids

<AuctionWonStatus></AuctionWonStatus>If user won this auction

<YourHighBid></YourHighBid>Your high bid for this auction

<YourProxyBid></YourProxyBid>Your proxy bid for this auction

Get Closed Auctions Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_closed_auctions&startDate=2000-01-02&endDate=2015-5-15

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetClosedAuctionsResponse>
  <GetClosedAuctionsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetClosedAuctionsHeader>
  <GetClosedAuctionsContent>
    <Auction>
      <AuctionId>2</AuctionId>
      <Domain>testdomain1.test</Domain>
      <AuctionStatusId>4</AuctionStatusId>
      <AuctionStatus>Closed by Timeout</AuctionStatus>
      <BidPrice>89.99</BidPrice>
      <BidPriceCurrency>USD</BidPriceCurrency>
      <Bids>1</Bids>
      <AuctionWonStatus>won</AuctionWonStatus>
      <YourHighBid>89.99</YourHighBid>
      <YourProxyBid>1000.0</YourProxyBid>
    </Auction>
    <Auction>
      <AuctionId>3</AuctionId>
      <Domain>testdomain2.test</Domain>
      <AuctionStatusId>4</AuctionStatusId>
      <AuctionStatus>Closed by Timeout</AuctionStatus>
      <BidPrice>28.99</BidPrice>
      <BidPriceCurrency>USD</BidPriceCurrency>
      <Bids>1</Bids>
      <AuctionWonStatus>won</AuctionWonStatus>
      <YourHighBid>28.99</YourHighBid>
      <YourProxyBid>1000.0</YourProxyBid>
    </Auction>
  </GetClosedAuctionsContent>
</GetClosedAuctionsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_closed_auctions&startDate=2000-01-02&endDate=2015-5-15

Response (JSON format)

{
  "GetClosedAuctionsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Auctions": [
      {
        "AuctionId": "2",
        "Domain": "testdomain1.test",
        "AuctionStatusId": "4",
        "AuctionStatus": "Closed by Timeout",
        "BidPrice": "89.99",
        "BidPriceCurrency": "USD",
        "Bids": "1",
        "AuctionWonStatus": "won",
        "YourHighBid": "89.99",
        "YourProxyBid": "1000.0"
      },
      {
        "AuctionId": "3",
        "Domain": "testdomain2.test",
        "AuctionStatusId": "4",
        "AuctionStatus": "Closed by Timeout",
        "BidPrice": "28.99",
        "BidPriceCurrency": "USD",
        "Bids": "1",
        "AuctionWonStatus": "won",
        "YourHighBid": "28.99",
        "YourProxyBid": "1000.0"
      }
    ]
  }
}

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=get_closed_auctions&startDate=2000-01-02&endDate=2015-5-15

Response (CSV format)

ok,success,AuctionId,Domain,AuctionStatusId,AuctionStatus,BidPrice,BidPriceCurrency,Bids,AuctionWonStatus,YourHighBid,YourProxyBid,2,testdomain1.test,4,Closed by Timeout,89.99,USD,1,won,89.99,1000.0,3,testdomain2.test,4,Closed by Timeout,28.99,USD,1,won,28.99,1000.0

Get Open Backorder Auctions Command(Deprecated,please use get_open_auctions command)

Support multi-thread

Calling the get open backorder auctions command will return a list of backorder auctions which are in progress. If calling this command, the following parameters should be included:

Get Open Backorder Auctions Request ParameterExplanation

Get Open Backorder Auctions Request Parameter
Explanation

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetOpenBackorderAuctionsResponse></GetOpenBackorderAuctionsResponse>Tag of get open backorder auctions response, it's the root node of the response XML document

<GetOpenBackorderAuctionsHeader></GetOpenBackorderAuctionsHeader>Get open backorder auctions header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetOpenBackorderAuctionsContent></GetOpenBackorderAuctionsContent>Tag of get open backorder auctions content, it's only used when status is "success"

<Auction></Auction>Tag of auction item, it's only used when status is "success"

<AuctionId></AuctionId>ID of auction

<Domain></Domain>Domain name of auction

<BidPrice></BidPrice>Current bid price of auction

<BidPriceCurrency></BidPriceCurrency>Currency of bid price

<Bids></Bids>Count of auction bids

<EndTime></EndTime>End time of auction

<EndTimestamp></EndTimestamp>End date of auction in Unix time (milliseconds since midnight UTC of January 1, 1970)

Get Open Backorder Auctions Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_open_backorder_auctions&currency=usd

Response (XML format)

<GetOpenBackorderAuctionsResponse>
  <GetOpenBackorderAuctionsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetOpenBackorderAuctionsHeader>
  <GetOpenBackorderAuctionsContent>
    <Auction>
           <AuctionId>0</AuctionId>
            <Domain>domain.com</Domain>
            <BidPrice>63.99</BidPrice>
            <BidPriceCurrency>USD</BidPriceCurrency>
            <Bids>0</Bids>
            <EndTime>2015/04/28 05:46 UTC</EndTime>
            <EndTimestamp>1430199960354</EndTimestamp>
    </Auction>
    <Auction>
           <AuctionId>0</AuctionId>
            <Domain>domain.com</Domain>
            <BidPrice>63.99</BidPrice>
            <BidPriceCurrency>USD</BidPriceCurrency>
            <Bids>0</Bids>
            <EndTime>2015/04/28 05:46 UTC</EndTime>
            <EndTimestamp>1430199960354</EndTimestamp>
    </Auction>
    .
    .
    .
  </GetOpenBackorderAuctionsContent>
</GetOpenBackorderAuctionsResponse>

Request(csv format)

https://api.dynadot.com/api3.html?key=mykey&command=get_open_backorder_auctions¤cy=usd

Response

ok,
success,
AuctionId,Domain,BidPrice,BidPriceCurrency,Bids,EndTime,EndTimestamp
10000,backorder0.com,6.35,USD,0,2017/08/29 17:53 UTC,1504029194453
10001,backorder1.com,1.0,USD,0,2017/08/29 17:53 UTC,1504029194453
10002,backorder2.com,1.0,USD,0,2017/08/29 17:53 UTC,1504029194453
.
.
.

Get Backorder Auction Details Command

Support multi-thread

Calling the get backorder auction details command will return the details of auction specified. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Get Auction Details Request ParameterExplanation

Get Auction Details Request Parameter
Explanation

domainThe domain name of backorder auction, IDN(International Domain Name) should use punycode, such as "xn--wkccg.com"

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetBackorderAuctionDetailsResponse></GetBackorderAuctionDetailsResponse>Tag of get auction details response, it's the root node of the response XML document

<GetAuctionDetailsHeader></GetAuctionDetailsHeader>Get auction details header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetAuctionDetailsContent></GetAuctionDetailsContent>Tag of get auction details content, it's only used when status is "success"

<AuctionStatus></AuctionStatus>Status of auction

<AuctionId></AuctionId>ID of auction

<Domain></Domain>Domain name of auction

<BidPrice></BidPrice>Current bid price of auction

<BidPriceCurrency></BidPriceCurrency>Currency of bid price

<Bids></Bids>Count of auction bids

<EndTime></EndTime>End time of auction

<EndTimestamp></EndTimestamp>End date of auction in Unix time (milliseconds since midnight UTC of January 1, 1970)

<Revenue></Revenue>Revenue of auction

<RevenueCurrency></RevenueCurrency>Currency of revenue

<Visitors></Visitors>Visitors of domain

<Links></Links>Inbound links of domain

<Age></Age>Age of domain

<UserIsHighBid></UserIsHighBid>If user is the highest bid

<YourCurrentBid></YourCurrentBid>Your current bid price for specified auction. If you haven't placed a bid, it will be '-1'

<YourProxyBid></YourProxyBid>Your proxy bid for specified auction. If you haven't placed a bid, it will be '-1'

Get Backorder Auction Details Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_backorder_auction_details&domain=example.com&currency=usd

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetBackorderAuctionDetailsResponse>
  <GetBackorderAuctionDetailsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetBackorderAuctionDetailsHeader>
  <GetBackorderAuctionDetailsContent>
    <AuctionStatusId>0</AuctionStatusId>
    <AuctionStatus>In Progress</AuctionStatus>
    <UserIsHighBid>no</UserIsHighBid>
    <YourCurrentBid>-1</YourCurrentBid>
    <YourProxyBid>-1</YourProxyBid>
    <Auction>
      <AuctionId>10001</AuctionId>
      <Domain>example.com</Domain>
      <BidPrice>89.99</BidPrice>
      <BidPriceCurrency>USD</BidPriceCurrency>
      <Bids>0</Bids>
      <EndTime>2015/04/28 18:16 UTC</EndTime>
      <EndTimestamp>1430244969779</EndTimestamp>
    </Auction>
  </GetBackorderAuctionDetailsContent>
</GetBackorderAuctionDetailsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_backorder_auction_details&domain=example.com&currency=usd

Response (JSON format)

{
  "GetBackorderAuctionDetailsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "GetBackorderAuctionDetails": {
      "AuctionStatusId": "0",
      "AuctionStatus": "In Progress",
      "UserIsHighBid": "no",
      "YourCurrentBid": "-1",
      "YourProxyBid": "-1",
      "Auction": {
        "AuctionId": "10001",
        "Domain": "example.com",
        "BidPrice": "89.99",
        "BidPriceCurrency": "USD",
        "Bids": "0",
        "EndTime": "2015/04/28 18:16 UTC",
        "EndTimestamp": "1430244969779"
      }
    }
  }
}

Place Backorder Auction Bid Command

Support multi-thread

Calling the place backorder auction bid command will place a bid for specified backorder auction. If calling this command, the following parameters should be included:

Place Backorder Auction Bid Request ParameterExplanation

Place Backorder Auction Bid Request Parameter
Explanation

domainThe domain name of auction, IDN (Internationalized Domain Name) should use punycode, such as "xn--wkccg.com"

bid_amountYour bid amount for auction, default currency is US Dollars, you can also specify it by currency parameter below

currency (optional)The currency of your bid, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<PlaceBakcorderAuctionBidResponse></PlaceBakcorderAuctionBidResponse>Tag of place auction bid response, it's the root node of the response XML document

<PlaceBackorderAuctionBidHeader></PlaceBackorderAuctionBidHeader>Place auction bid header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Place Backorder Auction Bid Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=place_backorder_auction_bid&domain=example.com&bid_amount=99.9&currency=usd

Response (XML format)

<PlaceBakcorderAuctionBidResponse>
 <PlaceBackorderAuctionBidHeader>
   <SuccessCode>0</SuccessCode>
   <Status>success</Status>
 </PlaceBackorderAuctionBidHeader>
</PlaceBakcorderAuctionBidResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=place_backorder_auction_bid&domain=example.com&bid_amount=99.9&currency=usd

Response (JSON format)

{
   "PlaceBakcorderAuctionBidResponse":{
      "ResponseCode":"0",
      "Status":"success"
   }
}

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=place_backorder_auction_bid&domain=example.com&bid_amount=99.9&currency=usd

Response (CSV format)

ok,success

Get Closed Backorder Auctions Command

Support multi-thread

Calling the get closed backorder auctions command will return a list of closed backorder auctions of specified account. If calling this command, the following parameters should be included:

Get Closed Backorder Auctions Request ParameterExplanation

Get Closed Backorder Auctions Request Parameter
Explanation

start_dateStart date of auction, yyyy-mm-dd, like 2015-05-05

end_dateEnd date of auction, yyyy-mm-dd, like 2015-05-05

currency (optional)The currency of your bid, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetClosedBackorderAuctionsResponse></GetClosedBackorderAuctionsResponse>Tag of get closed auctions response, it's the root node of the response XML document

<GetClosedBackorderAuctionsHeader></GetClosedBackorderAuctionsHeader>Get closed auctions header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetClosedBackorderAuctionsContent></GetClosedBackorderAuctionsContent>Tag of get closed auctions content, it's only used when status is "success"

<Auction></Auction>Tag of auction item, it's only used when status is "success"

<YourHighBid></YourHighBid>Your high bid for this auction

<YourProxyBid></YourProxyBid>Your proxy bid for this auction

<AuctionId></AuctionId>ID of auction

<Domain></Domain>Domain name of auction

<AuctionStatus></AuctionStatus>Status of auction

<BidPrice></BidPrice>Current bid price of auction

<BidPriceCurrency></BidPriceCurrency>Currency of bid price

<Bids></Bids>Count of auction bids

Get Closed Backorder Auctions Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_closed_backorder_auctions&startDate=2000-01-02&endDate=2015-5-15

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetClosedBackorderAuctionsResponse>
  <GetClosedBackorderAuctionsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetClosedBackorderAuctionsHeader>
  <GetClosedBackorderAuctionsContent>
    <Auction>
      <AuctionWonStatus>won</AuctionWonStatus>
      <YourHighBid>89.99</YourHighBid>
      <YourProxyBid>1000.0</YourProxyBid>
      <AuctionId>2</AuctionId>
      <Domain>testdomain1.test</Domain>
      <BidPrice>89.99</BidPrice>
      <BidPriceCurrency>USD</BidPriceCurrency>
      <Bids>1</Bids>
      <EndTime>2022/04/04 02:20:34 PST</EndTime>
      <EndTimestamp>1649064034033</EndTimestamp>
    </Auction>
    <Auction>
      <AuctionWonStatus>won</AuctionWonStatus>
      <YourHighBid>28.99</YourHighBid>
      <YourProxyBid>1000.0</YourProxyBid>
      <AuctionId>3</AuctionId>
      <Domain>testdomain2.test</Domain>
      <BidPrice>28.99</BidPrice>
      <BidPriceCurrency>USD</BidPriceCurrency>
      <Bids>1</Bids>
      <EndTime>2022/04/05 02:20:34 PST</EndTime>
      <EndTimestamp>1649150434049</EndTimestamp>
    </Auction>
  </GetClosedBackorderAuctionsContent>
</GetClosedBackorderAuctionsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_closed_backorder_auctions&startDate=2000-01-02&endDate=2015-5-15

Response (JSON format)

{
  "GetClosedBackorderAuctionsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Auctions": [
      {
        "AuctionWonStatus": "won",
        "YourHighBid": "89.99",
        "YourProxyBid": "1000.0",
        "AuctionId": "2",
        "Domain": "testdomain1.test",
        "BidPrice": "89.99",
        "BidPriceCurrency": "USD",
        "Bids": "1",
        "EndTime": "2022/04/04 02:20:34 PST",
        "EndTimestamp": "1649064034033"
      },
      {
        "AuctionWonStatus": "won",
        "YourHighBid": "28.99",
        "YourProxyBid": "1000.0",
        "AuctionId": "3",
        "Domain": "testdomain2.test",
        "BidPrice": "28.99",
        "BidPriceCurrency": "USD",
        "Bids": "1",
        "EndTime": "2022/04/05 02:20:34 PST",
        "EndTimestamp": "1649150434049"
      }
    ]
  }
}

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=get_closed_backorder_auctions&startDate=2000-01-02&endDate=2015-5-15

Response (CSV format)

ok,success,AuctionId,Domain,AuctionStatusId,AuctionStatus,BidPrice,BidPriceCurrency,Bids,AuctionWonStatus,YourHighBid,YourProxyBid,2,testdomain1.test,4,Closed by Timeout,89.99,USD,1,won,89.99,1000.0,3,testdomain2.test,4,Closed by Timeout,28.99,USD,1,won,28.99,1000.0

Get Expired Closeout Domains Command

Support multi-thread

Calling the Get Expired Closeout Domains Command will Get Expired Closeout Domains. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Get Expired Closeout Domains Request ParameterExplanation

Get Expired Closeout Domains Request Parameter
Explanation

currency(optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

domain(optional)Add this parameter if you want to query for a closeout domain

count_per_page (optional)How many entities are displayed per page

page_index (optional)Which page's entities do you want to view

Result XML tagExplanation

Result XML tag
Explanation

<GetExpiredCloseoutDomainsResponse></GetExpiredCloseoutDomainsResponse>Tag of Get Expired Closeout Domains response, it's the root node of the response XML document

<GetExpiredCloseoutDomainsHeader></GetExpiredCloseoutDomainsHeader>Get Expired Closeout Domains Header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetExpiredCloseoutDomainsContent></GetExpiredCloseoutDomainsContent>Tag of content, it's only used when status is "success"

<CloseoutItem></CloseoutItem>CloseoutItem

<DomainName></DomainName>The domain name

<DomainNameUtf></DomainNameUtf>The domain name is in utf format

<CurrentPrice></CurrentPrice>current price

<isIdn></isIdn>Whether it is the idn domain name

<EndTimeStamp></EndTimeStamp>End date of auction in Unix time (milliseconds since midnight UTC of January 1, 1970)

<RenewalPrice></RenewalPrice>Renewal price

<ExpiredRevenue></ExpiredRevenue>Revenue of closeout

<DynaAppraisal></DynaAppraisal>DynaAppraisal

<InboundLinks></InboundLinks>Inbound links of domain

<MonthlyVisitors></MonthlyVisitors>Visitors of domain

<Currency></Currency>currency

Get Expired Closeout Domains Example

Request (XML format)https://api.dynadot.com/api3.xml?key=MY_API_KEY&command=get_expired_closeout_domains&currency=usd

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetExpiredCloseoutDomainsResponse>
  <GetExpiredCloseoutDomainsHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </GetExpiredCloseoutDomainsHeader>
  <GetExpiredCloseoutDomainsContent>
    <CloseoutItem>
      <DomainName>test.biz</DomainName>
      <DomainNameUtf>test.biz</DomainNameUtf>
      <CurrentPrice>9.91</CurrentPrice>
      <IsIDN>false</IsIDN>
      <EndTimeStamp>0</EndTimeStamp>
      <RenewalPrice>9.99</RenewalPrice>
      <ExpiredRevenue>9.90</ExpiredRevenue>
      <EstibotAppraisal>1223</EstibotAppraisal>
      <InboundLinks>-1</InboundLinks>
      <MonthlyVisitors>-1</MonthlyVisitors>
      <Currency>usd</Currency>
    </CloseoutItem>
  </GetExpiredCloseoutDomainsContent>
</GetExpiredCloseoutDomainsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=MY_API_KEY&command=get_expired_closeout_domains&currency=usd

Response (JSON format)

{
  "GetExpiredCloseoutDomainsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Size": 1,
    "CloseoutDomains": [
      {
        "closeoutItem": {
          "domainName": "test.biz",
          "domainNameUtf": "test.biz",
          "currentPrice": "9.91",
          "isIdn": false,
          "endTimeStamp": 0,
          "renewalPrice": "9.99",
          "expiredRevenue": "9.90",
          "estibotAppraisal": "1223",
          "inboundLinks": -1,
          "monthlyVisitors": -1,
          "currency": "usd"
        }
      }
    ]
  }
}

Buy Expired Closeout Domain Command

Support multi-thread

Calling the Buy Expired Closeout Domain Command will buy the specified domain name. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Buy Expired Closeout Domain Request ParameterExplanation

Buy Expired Closeout Domain Request Parameter
Explanation

domainThe domain you want to buy, only 1 domain can be entered per request

currency(optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<BuyExpiredCloseoutDomainResponse></BuyExpiredCloseoutDomainResponse>Tag of Buy Expired Closeout Domain response, it's the root node of the response XML document

<BuyExpiredCloseoutDomainHeader></BuyExpiredCloseoutDomainHeader>Buy Expired Closeout Domain header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Buy Expired Closeout Domain Example

Request (XML format)https://api.dynadot.com/api3.xml?key=MY_API_KEY&command=buy_expired_closeout_domain&currency=USD&domain=domain.com

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<BuyExpiredCloseoutDomainResponse>
  <BuyExpiredCloseoutDomainHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </BuyExpiredCloseoutDomainHeader>
</BuyExpiredCloseoutDomainResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=MY_API_KEY&command=buy_expired_closeout_domain&currency=USD&domain=domain.com

Response (JSON format)

{
  "BuyExpiredCloseoutDomainResponse": {
    "ResponseCode": "0",
    "Status": "success"
  }
}

Get Listings Command

Support multi-thread

If calling get listings command, the following parameters should be included:

Get Listings Request ParameterExplanation

Get Listings Request Parameter
Explanation

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

exclude_pending_sale (optional)If you don't want to get pending sale lock listings, it should be "yes", default is "no"

show_other_registrar (optional)If you want to get other registrar listings, it should be "yes", default is "no"

Result XML tagExplanation

Result XML tag
Explanation

<GetListingsResponse></GetListingsResponse>Root node of the response XML documentXML document

<GetListingsHeader></GetListingsHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetListingsContent></GetListingsContent>Listing content

<Listing></Listing>Listing item content

<ListingId></ListingId>Listing Id

<Domain></Domain>Domain name

<Price></Price>Price

<InBoundLinks></InBoundLinks>In bound links count

<Age></Age>Age

Get Listings Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&currency=usd&command=get_listings

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetListingsResponse>
  <GetListingsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetListingsHeader>
  <GetListingsContent>
    <Listing>
      <ListingId>id1</ListingId>
      <Domain>domain_name1</Domain>
      <Price>1</Price>
      <InboundLinks>1</InboundLinks>
      <Age>1</Age>
      <PendingSaleLocked>No</PendingSaleLocked>
    </Listing>
    <Listing>
      <ListingId>id2</ListingId>
      <Domain>domain_name2</Domain>
      <Price>2</Price>
      <InboundLinks>2</InboundLinks>
      <Age>2</Age>
      <PendingSaleLocked>No</PendingSaleLocked>
    </Listing>
  </GetListingsContent>
</GetListingsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&currency=usd&command=get_listings

Response (JSON format)

{
  "GetListingsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Listing": [
      {
        "ListingId": "id1",
        "Domain": "domain_name1",
        "Price": "1",
        "InboundLinks": "1",
        "Age": "1",
        "PendingSaleLocked": "No"
      },
      {
        "ListingId": "id2",
        "Domain": "domain_name2",
        "Price": "2",
        "InboundLinks": "2",
        "Age": "2",
        "PendingSaleLocked": "No"
      }
    ]
  }
}

Get Listing Item Command

Support multi-thread

If calling get listing item command, the following parameters should be included:

Get Listing Item Request ParameterExplanation

Get Listing Item Request Parameter
Explanation

domainThe domain name you want to get detail, only 1 domain can be entered per request

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", default currency is US Dollars

Result XML tagExplanation

Result XML tag
Explanation

<GetListingItemResponse></GetListingItemResponse>Root node of the response XML documentXML document

<GetListingItemHeader></GetListingItemHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetListingsItemContent></GetListingsItemContent>Listing content

<Listing></Listing>Listing item content

<ListingId></ListingId>Listing Id

<Domain></Domain>Domain name

<Price></Price>Price

<InBoundLinks></InBoundLinks>In bound links count

<Age></Age>Age

Get Listing Item Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=get_listing_item&currency=usd&domain=domain_name

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetListingsItemResponse>
  <GetListingsItemHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </GetListingsItemHeader>
  <GetListingsItemContent>
    <Listing>
      <ListingId>id</ListingId>
      <Domain>domain_name</Domain>
      <Price>0</Price>
      <InboundLinks>0</InboundLinks>
      <Age>0</Age>
      <PendingSaleLocked>No</PendingSaleLocked>
    </Listing>
  </GetListingsItemContent>
</GetListingsItemResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=get_listing_item&currency=usd&domain=domain_name

Response (JSON format)

{
  "GetListingsItemResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Listing": {
      "ListingId": "id",
      "Domain": "domain_name",
      "Price": "0",
      "InboundLinks": "0",
      "Age": "0",
      "PendingSaleLocked": "No"
    }
  }
}

Buy It Now Command

Support multi-thread

If calling buy it now command, the following parameters should be included:

Buy It Now Request ParameterExplanation

Buy It Now Request Parameter
Explanation

domainThe domain you want to buy, only 1 domain can be entered per request

currency (optional)The currency of return result, it should be "usd", "eur", or "cny", if no currency entered, the account default currency will be applied

Result XML tagExplanation

Result XML tag
Explanation

<BuyItNowResponse></BuyItNowResponse>Root node of the response XML documentXML document

<BuyItNowHeader></BuyItNowHeader>Response header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<Message></Message>It should be "domain order created", only used when status is "success".

Buy It Now Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=buy_it_now&domain=domain&currency=currency

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<BuyItNowResponse>
  <BuyItNowHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </BuyItNowHeader>
</BuyItNowResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=buy_it_now&domain=domain&currency=currency

Response (JSON format)

{
  "BuyItNowResponse": {
    "ResponseCode": 0,
    "Status": "success"
  }
}

Set For Sale Command

Support multi-thread

This command supports multi-thread.

Calling the Set For Sale Command will list your domain for sale in the Domain Marketplace. This command is only available in XML and JSON format.If calling this command, the following parameters should be included:

Set For Sale Request ParameterExplanation

Set For Sale Request Parameter
Explanation

domainsThe domain you want to list your domain for sale in the Domain Marketplace, only 1 domain can be entered per request

for_sale_typeYou can choose a value from the following list to represent your sales type:
> marketplace:
List your domain for sale in the Domain Marketplace. New domain listings will be set to the category, sub-category, and price entered below. If an actual price is set, the domain will be available for immediate purchase and push to the buyer. More info on the domain sale process >

> not_for_sale:
cancel listing

listing_type (optional)You can choose a value from the following list to represent your sales type through the market: (mandatory if for_sale_type is marketplace)
> buy_now
Setting a fixed price will set the domain to be available for immediate purchase and push to the buyer.
Note: For domain in add grace period, if there is a sale, it may no longer be grace deleted. More information about Grace Deletion

> make_offer
You may choose to set a minimum offer price or leave it blank to allow any offer amount.
Note: For domain in add grace period, if there is a sale, it may no longer be grace deleted. More information about Grace Deletion

> buy_now_and_make_offer Setting a fixed price will set the domain to be available for immediate purchase and push to the buyer.
You may choose to set a minimum offer price or leave it blank to allow any offer amount.
Note: For domain in add grace period, if there is a sale, it may no longer be grace deleted. More information about Grace Deletion

price (optional)the price you want to sell your domain for. (mandatory if for_sale_type is marketplace)

minimum_offer (optional)the minimum offer you will accept for your domain. (mandatory if for_sale_type is marketplace)

installment (optional)Is installment payment allowed. If you want to enable installment payment, set it equal to "Yes"

maximum_installments (optional)The maximum number of installments allowedonly used when installment is "true"
You can choose a value from 2 to 12 to represent the maximum months for the installment payment

category (optional)choose a category for your domain, You can refer to the Category and Sub-category comparison table below for optional filling.

Sub-category (optional)choose a sub-category for your domain, You can refer to the Category and Sub-category comparison table below for selection.
Note: your parameter value needs to be the number corresponding to Sub-category.

Category	Sub-category
advertising	marketing retail sales
automotive	cars_trucks enthusiasts motorsports
business	investment law money professions services
careers_education	No subCategory
consumer_goods_services	apparel electronics
entertainment	games pop_culture
fashion	No subCategory
finance	No subCategory
gambling	casino sports
health	fitness medicine
internet	blogs ecommerce domains web_design web_hosting
other	No subCategory
places	africa asia europe north_america south_america
real_estate	No subCategory
science	No subCategory
society	culture news politics religion
sports	leisure_activities professional
technology	computers
uncategorized	No subCategory
adult	No subCategory
home	No subCategory
ai	No subCategory
aerospace	No subCategory
agency	No subCategory
agriculture_company	No subCategory
analytics	No subCategory
alcohol	No subCategory
babies_kids	No subCategory
biotech	No subCategory
clean_energy	No subCategory
cleaning	No subCategory
community	No subCategory
construction_organization	No subCategory
cryptocurrency_blockchain	No subCategory
dating_relationship	No subCategory
daycare	No subCategory
dental	No subCategory
drone	No subCategory
e_commerce	No subCategory
food_drink	No subCategory
furniture	No subCategory
games	No subCategory
insurance	No subCategory
interior_design	No subCategory
legal_law	No subCategory
motivational	No subCategory
manufacturing	No subCategory
marketing	No subCategory
medical	No subCategory
metaverse	No subCategory
movies_tv	No subCategory
music_audio	No subCategory
news_media	No subCategory
nft	No subCategory
outdoor	No subCategory
payment	No subCategory
pets	No subCategory
politics	No subCategory
property_management	No subCategory
recruitment_staffing	No subCategory
services	No subCategory
security	No subCategory
social	No subCategory
transportation	No subCategory
travel	No subCategory
video_books_magazines	No subCategory
virtual_reality	No subCategory
website_design	No subCategory

Description (optional)Description of your domain

Result XML tagExplanation

Result XML tag
Explanation

<SetForSaleResponse></SetForSaleResponse>the root node of the response

<SetForSaleHeader></SetForSaleHeader>Set For Sale header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set For Sale Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=set_for_sale&domains=test.com&for_sale_type=marketplace&listing_type=buy_now&price=1000&installment=Yes&category=health&sub_category=fitness&maximum_installments=4&for_sale_type=marketplace&description=testdescription

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetForSaleResponse>
  <SetForSaleHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </SetForSaleHeader>
</SetForSaleResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=set_for_sale&domains=test.com&for_sale_type=marketplace&listing_type=buy_now&price=1000&installment=Yes&category=health&sub_category=fitness&maximum_installments=4&for_sale_type=marketplace&description=testdescription

Response (JSON format)

{
  "SetForSaleResponse": {
    "ResponseCode: ": "0",
    "Status": "Success"
  }
}

Set Afternic Confirm Action Command

Support multi-thread

Calling the Set Afternic Confirm Action Command will set the domain to approve or disapprove fast-transfer on Afternic. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Set Afternic Confirm Action Request ParameterExplanation

Set Afternic Confirm Action Request Parameter
Explanation

domainThe domain you want to set Afternic confirm fast transfer action, only 1 domain can be entered per request

actionThe action you want to set afternic confirm to, it should be "confirm_afternic", or "delete_from_afternic"

Result XML tagExplanation

Result XML tag
Explanation

<SetAfternicConfirmActionResponse></SetAfternicConfirmActionResponse>Tag of Set Afternic Confirm Action response, it's the root node of the response XML document

<SetAfternicConfirmActionHeader></SetAfternicConfirmActionHeader>Set Afternic Confirm Action header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Afternic Confirm Action Example

Request (XML format)https://api.dynadot.com/api3.xml?key=MY_API_KEY&command=set_afternic_confirm_action&domain=domain.com&action=confirm_afternic

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetAfternicConfirmActionResponse>
  <SetAfternicConfirmActionHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetAfternicConfirmActionHeader>
</SetAfternicConfirmActionResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=MY_API_KEY&command=set_afternic_confirm_action&domain=domain.com&action=confirm_afternic

Response (JSON format)

{
  "SetAfternicConfirmActionResponse": {
    "ResponseCode": "0",
    "Status": "success"
  }
}

Set Sedo Confirm Action Command

Support multi-thread

Calling the Set Sedo Confirm Action Command will set the domain to approve or disapprove fast-transfer on Sedo. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Set Sedo Confirm Action Request ParameterExplanation

Set Sedo Confirm Action Request Parameter
Explanation

domainThe domain you want to set Sedo confirm fast transfer action, only 1 domain can be entered per request

actionThe action you want to set sedo confirm to, it should be "confirm_sedo", or "delete_from_sedo"

Result XML tagExplanation

Result XML tag
Explanation

<SetSedoConfirmActionResponse></SetSedoConfirmActionResponse>Tag of Set Sedo Confirm Action response, it's the root node of the response XML document

<SetSedoConfirmActionHeader></SetSedoConfirmActionHeader>Set Sedo Confirm Action header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

Set Sedo Confirm Action Example

Request (XML format)https://api.dynadot.com/api3.xml?key=MY_API_KEY&command=set_sedo_confirm_action&domain=domain.com&action=confirm_sedo

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<SetSedoConfirmActionResponse>
  <SetSedoConfirmActionHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </SetSedoConfirmActionHeader>
</SetSedoConfirmActionResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=MY_API_KEY&command=set_sedo_confirm_action&domain=domain.com&action=confirm_sedo

Response (JSON format)

{
  "SetSedoConfirmActionResponse": {
    "ResponseCode": "0",
    "Status": "success"
  }
}

Order List Command

Support multi-thread

Calling the Order List Command will get order list. This command is only available in XML and JSON format.If calling this command, the following parameters should be included:

Order List Request ParameterExplanation

Order List Request Parameter
Explanation

search_byYou can choose a value from the following list to represent your search type: date_range, domain, order_id

start_datethe start date of your query in the format of yyyy/MM/dd

end_datethe end date of your query in the format of yyyy/MM/dd

payment_methodYou can choose multiple values from the following list to represent your payment method:
none_balance
account_balance
credit_card
money_order
paypal
moneybookers
bank_wire
alipay
payflow_credit_card2 (No longer used)
wechat_pay
ecash
bank_transfer
apple_pay
checking_account
sale
union_pay
paypal_account
mercado_pago
payoneer
but please use comma to separate multiple values, for example: account_balance,credit_card

Result XML tagExplanation

Result XML tag
Explanation

<OrderListResponse></OrderListResponse>the root node of the response

<OrderListHeader></OrderListHeader>Order List header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<OrderListContent></OrderListContent>Order List header

<OrderList></OrderList>Contains multiple sets of order log data

<OrderItem></OrderItem>Contains single order log data

<OrderItemDomain></OrderItemDomain>The domain name that includes the items in this order

<OrderId></OrderId>Contains the id of the order

<SubmittedDate></SubmittedDate>Contains date the order was submitted

<Cost></Cost>Contains the cost of the order

<Status></Status>Contains the status of the order

Order List Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=order_list&search_by=date_range&start_date=2024/01/01&end_date=2024/01/31&payment_method=account_balance,credit_card

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<OrderListResponse>
  <OrderListHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </OrderListHeader>
  <OrderListContent>
    <OrderList>
      <Order>
        <OrderId>123456</OrderId>
        <SubmittedDate>1734965543412</SubmittedDate>
        <Currency>USD</Currency>
        <PaymentMethod>Account Balance</PaymentMethod>
        <TotalCost>$8.00</TotalCost>
        <TotalPaid>$8.00</TotalPaid>
        <Status>Problem</Status>
        <OrderItem>
          <ItemType>Domain Registration</ItemType>
          <Name>test.com</Name>
          <Duration>1</Duration>
          <Cost>2.99</Cost>
          <Status>Completed</Status>
        </OrderItem>
        <OrderItem>
          <ItemType>Domain Renewal</ItemType>
          <Name>test1.ac</Name>
          <Duration>1</Duration>
          <Cost>3.99</Cost>
          <Status>Completed</Status>
        </OrderItem>
        <OrderItem>
          <ItemType>Domain Transfer</ItemType>
          <Name>test2.de</Name>
          <Duration>1</Duration>
          <Cost>4.99</Cost>
          <Status>Completed</Status>
        </OrderItem>
        <OrderItem>
          <ItemType>Domain Registration</ItemType>
          <Name>test3.gg</Name>
          <Duration>1</Duration>
          <Cost>5.99</Cost>
          <Status>Completed</Status>
        </OrderItem>
        <OrderItem>
          <ItemType>Domain Renewal</ItemType>
          <Name>test4.uk</Name>
          <Duration>1</Duration>
          <Cost>6.99</Cost>
          <Status>Completed</Status>
        </OrderItem>
        <OrderItem>
          <ItemType>Domain Transfer</ItemType>
          <Name>test5.net</Name>
          <Duration>1</Duration>
          <Cost>7.99</Cost>
          <Status>Completed</Status>
        </OrderItem>
      </Order>
      <Order>
        <OrderId>123457</OrderId>
        <SubmittedDate>1734965543412</SubmittedDate>
        <Currency>EUR</Currency>
        <PaymentMethod>Paypal</PaymentMethod>
        <TotalCost>$100.00</TotalCost>
        <TotalPaid>$100.00</TotalPaid>
        <Status>Submitted</Status>
      </Order>
    </OrderList>
  </OrderListContent>
</OrderListResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=order_list&search_by=date_range&start_date=2024/01/01&end_date=2024/01/31&payment_method=account_balance,credit_card

Response (JSON format)

{
  "OrderListResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "OrderList": [
      {
        "OrderId": "123456",
        "SubmittedDate": "2024/12/23",
        "Currency": "USD",
        "PaymentMethod": "Account Balance",
        "TotalCost": "$8.00",
        "TotalPaid": "$8.00",
        "Status": "Problem",
        "ItemList": [
          {
            "ItemType": "Domain Registration",
            "Name": "test.com",
            "Duration": 1,
            "Cost": "2.99",
            "Status": "Completed"
          },
          {
            "ItemType": "Domain Renewal",
            "Name": "test1.ac",
            "Duration": 1,
            "Cost": "3.99",
            "Status": "Completed"
          },
          {
            "ItemType": "Domain Transfer",
            "Name": "test2.de",
            "Duration": 1,
            "Cost": "4.99",
            "Status": "Completed"
          },
          {
            "ItemType": "Domain Registration",
            "Name": "test3.gg",
            "Duration": 1,
            "Cost": "5.99",
            "Status": "Completed"
          },
          {
            "ItemType": "Domain Renewal",
            "Name": "test4.uk",
            "Duration": 1,
            "Cost": "6.99",
            "Status": "Completed"
          },
          {
            "ItemType": "Domain Transfer",
            "Name": "test5.net",
            "Duration": 1,
            "Cost": "7.99",
            "Status": "Completed"
          }
        ]
      },
      {
        "OrderId": "123457",
        "SubmittedDate": "2024/12/23",
        "Currency": "EUR",
        "PaymentMethod": "Paypal",
        "TotalCost": "$100.00",
        "TotalPaid": "$100.00",
        "Status": "Submitted",
        "ItemList": []
      }
    ]
  }
}

Get Order Status Command

Support multi-thread

Calling the Get Order Status Command will get order status. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

Get Order Status Request ParameterExplanation

Get Order Status Request Parameter
Explanation

order_idThe id of the order to be queried

Result XML tagExplanation

Result XML tag
Explanation

<GetOrderStatusResponse></GetOrderStatusResponse>the root node of the response

<GetOrderStatusHeader></GetOrderStatusHeader>Get Order Status header

<ResponseCode></ResponseCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<GetOrderStatusContent></GetOrderStatusContent>response content

<OrderId></OrderId>order id

<OrderStatus></OrderStatus>order status( Shopping, Submitted, Waitpay, Processing, Completed, Problem, Deleted, Cancelled )

<ItemTypeName></ItemTypeName>item Type

<ItemName></ItemName>item Name

<ItemStatus></ItemStatus>Item Status(Completed, Cancelled, Problem)

Get Order Status Example

Request (XML format)https://api.dynadot.com/api3.xml?key=MY_API_KEY&command=get_order_status&order_id=0

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<GetOrderStatusResponse>
  <GetOrderStatusHeader>
    <ResponseCode>0</ResponseCode>
    <Status>success</Status>
  </GetOrderStatusHeader>
  <GetOrderStatusContent>
    <OrderId>0</OrderId>
    <OrderStatus>Completed</OrderStatus>
    <Item>
      <ItemTypeName>domain transfer away</ItemTypeName>
      <ItemName>&amp;</ItemName>
      <ItemStatus>transfer.com</ItemStatus>
    </Item>
    <Item>
      <ItemTypeName>domain</ItemTypeName>
      <ItemName>&amp;</ItemName>
      <ItemStatus>register.com</ItemStatus>
    </Item>
  </GetOrderStatusContent>
</GetOrderStatusResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=MY_API_KEY&command=get_order_status&order_id=0

Response (JSON format)

{
  "GetOrderStatusResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "OrderStatus": {
      "OrderId": 0,
      "OrderStatus": "Completed",
      "ItemList": [
        {
          "ItemTypeName": "domain transfer away",
          "ItemName": "transfer.com",
          "ItemStatus": "Completed"
        },
        {
          "ItemTypeName": "domain",
          "ItemName": "register.com",
          "ItemStatus": "Completed"
        }
      ]
    }
  }
}

Is Processing Command

Support multi-thread

Calling the is_processing command will tell you whether it is safe to submit a new request

Is-Processing Request ParameterExplanation

Is-Processing Request Parameter
Explanation

no extra parameter is needed

Result XML tagExplanation

Result XML tag
Explanation

<Response></Response>Tag of is_processing response

<ResponseHeader></ResponseHeader>Tag of is_processing header

<ResponseMsg></ResponseMsg>Tag of is_processing response message. It should be "yes"(There is a process in the system. You shouldn't sent another request.) or "no"(There is no any process for you account. It is safe to submit a new request.)

Is-Processing Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=is_processing

Response (XML format)

<Response>
  <ResponseHeader>
    <ResponseCode>0</ResponseCode>
    <ResponseMsg>yes</ResponseMsg>
  </ResponseHeader>
</Response>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=is_processing

Response (JSON format)

{
   "Response":{
      "ResponseCode":"0",
      "ResponseMsg":"no"
   }
}

Request (CSV format)https://api.dynadot.com/api3.html?key=[API Key]&command=is_processing

Response (CSV format)

ok,yes

List Coupons Command

Support multi-thread

Calling the List Coupons Command will get all coupons. This command is only available in XML and JSON format. If calling this command, the following parameters should be included:

List Coupons Request ParameterExplanation

List Coupons Request Parameter
Explanation

coupon_typeYou can choose a value from the following list to represent your search type: "registration" , "renewal" , or "transfer"

Result XML tagExplanation

Result XML tag
Explanation

<ListCouponsResponse></ListCouponsResponse>the root node of the response

<ListCouponsHeader></ListCouponsHeader>List Coupons header

<SuccessCode></SuccessCode>If the operation is successful, "0" for success, "-1" for failure

<Status></Status>The status of request

<Error></Error>Error information about the request, only used when status is "error"

<ListCouponsContent></ListCouponsContent>List Coupons content

<Coupons></Coupons>Contains multiple sets of coupon data

<Coupon></Coupon>Contains single coupon data

<Code></Code>Coupon code

<Description></Description>Description of the coupon

<CouponType></CouponType>Type of the coupon

<DiscountType></DiscountType>Type of discount offered by the coupon

<DiscountInfo></DiscountInfo>The discount information of the coupon

<Percentage></Percentage>The percentage of the discount

<AUD></AUD>Discount amount in Australian Dollars

<MXN></MXN>Discount amount in Mexican Pesos

<EUR></EUR>Discount amount in Euros

<GBP></GBP>Discount amount in British Pounds

<IDR></IDR>Discount amount in Indonesian Rupiah

<USD></USD>Discount amount in United States Dollars

<CAD></CAD>Discount amount in Canadian Dollars

<INR></INR>Discount amount in Indian Rupees

<BRL></BRL>Discount amount in Brazilian Real

<CNY></CNY>Discount amount in Chinese Yuan

<Restriction></Restriction>Coupon restrictions

<PriceLevels></PriceLevels>A collection of price levels that support the use of coupons

<UsesPerAccount></UsesPerAccount>The number of times the coupon can be used per account

<UsesSystemWide></UsesSystemWide>The number of times the coupon can be used system-wide

<UsesPerIp></UsesPerIp>The number of times the coupon can be used per IP address

<ItemsPerAccount></ItemsPerAccount>The number of items the coupon can be used for per account

<ItemsSystemWide></ItemsSystemWide>The number of items the coupon can be used for system-wide

<ItemsPerOrder></ItemsPerOrder>The number of items the coupon can be used for per order

<ItemsPerDay></ItemsPerDay>The number of items the coupon can be used for per day

<IdnRestriction></IdnRestriction>IDN restrictions for the coupon

<DomainDurationMin></DomainDurationMin>Minimum domain duration

<DomainDurationMax></DomainDurationMax>Maximum domain duration

<Tlds></Tlds>A collection of top-level domains that support the use of coupons

<Tld></Tld>A single top-level domain that supports the use of coupons

<Currencies></Currencies>A collection of currency types that support the use of coupons

<Currency></Currency>A single currency type that supports the use of coupons

<StartDate></StartDate>The start date of the coupon's validity

<EndDate></EndDate>The end date of the coupon's validity

List Coupons Example

Request (XML format)https://api.dynadot.com/api3.xml?key=[API Key]&command=list_coupons&coupon_type=renewal

Response (XML format)

<?xml version="1.0" encoding="UTF-8"?>
<ListCouponsResponse>
  <ListCouponsHeader>
    <SuccessCode>0</SuccessCode>
    <Status>success</Status>
  </ListCouponsHeader>
  <ListCouponsContent>
    <Coupons>
      <Coupon>
        <Code>DOMAINRENEW1</Code>
        <Description>Domain Renew Coupon</Description>
        <CouponType>Hosting/SSL Coupons</CouponType>
        <DiscountType>PERCENTAGE_OFF</DiscountType>
        <DiscountInfo>
          <Percentage>10%</Percentage>
        </DiscountInfo>
        <Restriction>
          <PriceLevels>Any</PriceLevels>
          <IdnRestriction>None</IdnRestriction>
          <DomainDurationMin>1</DomainDurationMin>
          <DomainDurationMax>1</DomainDurationMax>
          <Tlds>
            <Tld>.com</Tld>
            <Tld>.net</Tld>
            <Tld>.org</Tld>
          </Tlds>
          <Currencies>
            <Currency>US Dollar USD ($)</Currency>
          </Currencies>
        </Restriction>
        <StartDate>1476811260000</StartDate>
        <EndDate>1483257540000</EndDate>
      </Coupon>
    </Coupons>
  </ListCouponsContent>
</ListCouponsResponse>

Request (JSON format)https://api.dynadot.com/api3.json?key=[API Key]&command=list_coupons&coupon_type=renewal

Response (JSON format)

{
  "ListCouponsResponse": {
    "ResponseCode": 0,
    "Status": "success",
    "Coupons": [
      {
        "Code": "DOMAINRENEW1",
        "Description": "Domain Renew Coupon",
        "CouponType": "Hosting/SSL Coupons",
        "DiscountType": "PERCENTAGE_OFF",
        "DiscountInfo": {
          "Percentage": "10%"
        },
        "Restriction": {
          "PriceLevels": "Any",
          "IdnRestriction": "None",
          "DomainDurationMin": "1",
          "DomainDurationMax": "1",
          "Tlds": [
            ".com",
            ".net",
            ".org"
          ],
          "Currencies": [
            "US Dollar USD ($)"
          ]
        },
        "StartDate": "1476811260000",
        "EndDate": "1483257540000"
      }
    ]
  }
}

Chat Online

Current chats in queue: 0

Chat Online0